Model : VOXY ZRR/ZWR8#, Esquire ZRR/ZWR8#, NOAH WR/RR8#
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ355 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. VOXY 2014/01- ZRR80G,ZRR85G,ZRR80W,ZRR85W 3ZR-FAE VOXY 2014/02- ZWR80G,ZWR80W 2ZR-FXE VOXY G´s 2016/04- ZRR80W 3ZR-FAE ESQUIRE 2014/10- ZRR80G,ZRR85G 3ZR-FAE ESQUIRE 2014/10- ZWR80G 2ZR-FXE NOAH 2014/01- ZRR80G,ZRR85G,ZRR80W,ZRR85W 3ZR-FAE NOAH 2014/02- ZWR80G,ZWR80W 2ZR-FXE NOAH G´s 2016/04- ZRR80W 3ZR-FAE Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : Universal fit
Delivery time by Air : 14-21 days
Category : Exhaust tips
NUR-SPEC CUSTOM EDITION option part. Tail Diameter: φ114.3 Insertion diameter: φ62 Tip Material: Carbon Red
Please input your Email address and password.
Model : Universal fit
Delivery time by Air : 14-21 days
Category : Exhaust tips
NUR-SPEC CUSTOM EDITION option part. Tail Diameter: φ114.3 Insertion diameter: φ62 Tip Material: Titunium color
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZN6
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZN6
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZN6, 6MT ealier and later model and 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
TUNERS KIT B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: ○ with down pipe ECU: X Boost Controller: X B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For Toyota 86, ZN6, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), Toyota 86 ZN6 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Model : ZC6, FA20, MY 03/2012 -
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Adjustable pillow / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.0 Free length F/R: 150 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -55 to 0 / -60 to -10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: FF / x BRAIN connection: x For BRZ, ZC6, FA20 engine, MY 03/2012 - Remarks: MC前後共通, リアショック上部トランクサイドパネル要カット加工, ピロアッパーマウントを採用しているためショック作動音が聞こえやすくなります BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ZC6, FA20, MY 03/2012 -
Delivery time by Air : 21-35 days
Category : Coilovers
Spec: Mount F/R: Adjustable pillow / Fixed pillow Rate F/R(kgf/mm): 8.0 / 7.0 Free length F/R: 135 / 180 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -50 to -10 / -45 to 0 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: FA / x BRAIN connection: x For BRZ, ZC6, FA20 engine, MY 03/2012 - Remarks: For both models of Zenki (earlier model) and Koki (later model), Sound gets louder due to pillow upper mounts BLITZ DAMPER ZZ-R Spec-C features: - Shock absorber of full length adjustment adopted single cylinder type (monotube). Independent expansion and contraction 32 levels damping force adjustable. - 2WAY 32 levels damping force adjustment mechanism extension side and compression side independently. For all driving scene from the street use to car racing by high level balancing the damping force. * At the extension side of the damping dial, the damping force changes at the same time as it expands and contracts. - Separate tank type structure increases the amount of oil. Full damping force even in very low speed range. To reduce troubles during installation, the peculiar hose line structure to the separate tank is abolished. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ46 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. - When installing the DAMPER ZZ-R Spec-C series, the separate tank may interfere. (depending on wheel or tire size). Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Who we are
How to order


