JDM specialist Japanparts.com

4POT caliper. Disc: diameter 330/2 piece. Pad type: STREET.

Spec: Mount F/R: Stock / Stock Rate F/R(kgf/mm): 6.0 / 4.0 Free length F/R: 200 / 200 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -85 to 0 / -59 to -22 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: FF / x BRAIN connection: ○　It may not fit, depends on manufacture year. <a href=https://www.blitz.co.jp/new-product/damper-zzr.pdf target="new">Please check the chart on BLITZ HP.</a> The data is for FREED, GB5, L15B engine, MY 09/2016 - FREED, GB5 L15B engine, GB7 LEB engine, MY 09/2016 - Removing or customizing some interior parts is required for rear motor installation. , Height adjustment range F/R is the data of GB7 Optional parts DSC PLUS GPS sensor kit is listed as <a href=https://www.japanparts.com/parts/detail/59991 target="new">135-055-999</a> DSC PLUS remote switch is listed as <a href=https://www.japanparts.com/parts/detail/59992 target="new">135-055-998</a> BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Stock / Stock Rate F/R(kgf/mm): 5.0 / 3.0 Free length F/R: 180 / 190 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -60 to -20 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. <a href=https://www.blitz.co.jp/new-product/damper-zzr.pdf target="new">Please check the chart on BLITZ HP.</a> For FIT, GK3, L13B engine, MY 09/2013 - For FIT, GK5, L15B engine, MY 09/2013 - For FIT HYBRID, GP5, LEB engine, MY 09/2013 - Remarks: 2WD, Removing or customizing some interior parts is required for rear motor installation. Optional parts DSC PLUS GPS sensor kit is listed as <a href=https://www.japanparts.com/parts/detail/59991 target="new">135-055-999</a> DSC PLUS remote switch is listed as <a href=https://www.japanparts.com/parts/detail/59992 target="new">135-055-998</a> BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330mm / 1Piece, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For COROLLA SPORT, Model NRE210H NRE214H ZWE211H, Eng.8NR-FTS 2ZR-FXE , MY 06/2018 - For PRIUS, Model ZVW50 ZVW51 ZVW55 , Eng.2ZR-FXE , MY 12/2015 - Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ355 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. ALPHARD 2008/05-2015/01 ANH20W,ANH25W 2AZ-FE ALPHARD 2008/05-2015/01 GGH20W,GGH25W 2GR-FE ALPHARD 2015/01- AGH30W,AGH35W 2AR-FE ALPHARD 2015/01- GGH30W,GGH35W 2GR-FE ALPHARD G´s 2012/11-15/01 ANH20W 2AZ-FE ALPHARD G´s 2012/11-15/01 GGH20W 2GR-FE ALPHARD HYBRID 2011/11-15/01 ATH20W 2AZ-FXE ALPHARD HYBRID 2015/01- AYH30W 2AR-FXE VELLFIRE 2008/05-15/01 ANH20W,ANH25W 2AZ-FE VELLFIRE 2008/05-15/01 GGH20W,GGH25W 2GR-FE VELLFIRE 2015/01- AGH30W,AGH35W 2AR-FE VELLFIRE 2015/01- GGH30W,GGH35W 2GR-FE VELLFIRE G´s 2012/11-15/01 ANH20W 2AZ-FE VELLFIRE G´s 2012/11-15/01 GGH20W 2GR-FE VELLFIRE HYBRID 2011/11-15/01 ATH20W 2AZ-FXE VELLFIRE HYBRID 2015/01- AYH30W 2AR-FXE HARRIER 2013/12- ZSU60W,ZSU65W 3ZR-FAE HARRIER 2017/06- ASU60W,ASU65W 8AR-FTS HARRIER G´s 2015/01- ZSU60W,ZSU65W 3ZR-FAE HARRIER HYBRID 2014/01- AVU65W 2AR-FXE Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ355 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. VOXY 2014/01- ZRR80G,ZRR85G,ZRR80W,ZRR85W 3ZR-FAE VOXY 2014/02- ZWR80G,ZWR80W 2ZR-FXE VOXY G´s 2016/04- ZRR80W 3ZR-FAE ESQUIRE 2014/10- ZRR80G,ZRR85G 3ZR-FAE ESQUIRE 2014/10- ZWR80G 2ZR-FXE NOAH 2014/01- ZRR80G,ZRR85G,ZRR80W,ZRR85W 3ZR-FAE NOAH 2014/02- ZWR80G,ZWR80W 2ZR-FXE NOAH G´s 2016/04- ZRR80W 3ZR-FAE Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.