JDM specialist Japanparts.com

- Product Review
Genuine Subaru part, very high quality. Comes with adhesive backing pre-applied and locator pins for use with BRZ STI fender garnishes. I wouldn't recommend attempting to install on a standard 2017+ car as the part does not fit, even after shaving the locator pins off the back side.

- Photo

- Installation tips
Not compatible with standard 2017+ fender garnish. After shaving the locating pins, it looks like they might fit on the existing fender garnish, but these doesn't follow the contour of the 2017+ fender trim at all. Due to that, there's a noticeable gap when installed, and only the rear of the part has enough adhesive contact to actually stick. The middle has no adhesive contact and the very front has around 2mm of adhesive contact, nowhere near enough to hold it in place. In the attached picture you can see the contour of the part vs the contour of the garnish - the part is curved much more sharply than the flatter curve of the 2017+ fender garnish, causing the middle part of the badge to stick out. Moving the part forward or backward along the garnish makes no difference, nor does tilting it.

- Product Review
Sti front fender emblems to replace the factory fender emblems.(It's only perfect fit on BRZ sti model)It also can fit on brz 2017+ but you need to shave or remove the locator pins. Requires the same style factory fender garnishes.

- Photo

- Installation tips
Must shave,cut or remove the locator pins to install.