JDM specialist Japanparts.com

- Product Review
The bar is pending install, but arrived safely with no damage to packaging and with instructions that can be translated using a mobile phone app for easy interpretation.

- Photo

- Installation tips
Pages 3 & 4 of the instructions are included in the images, for page 5:

- Loosen the two M6 bolts that secure the bracket and bar by 1/2 to 1 turn, then retighten them to the specified torque: 10Nm (1.0 kgfm)

Please be careful not to overtighten as this may cause deformation of the bar.
Tools used: 5mm hexagon socket, torque wrench.

- After installation, check the clearance between the bar and the rubber boots and the vehicle. To Adjust the clearance, loosen the M6 bolts that secure the bracket and bar, and adjust the bar position.

- Adjust so that it is level with the bottom edge of the cowl panel.
- Clearance between engine cover and rubber boot: 50mm or more.
Please check if the vehicle certification is legible.

When removing the flexible tower bar from the vehicle and putting it away, be careful not to bend the center part (Rubber boot part).
- Do not remove the rubber boot fromt he central ball bearing.