Model : R35
Delivery time by Air : 130 days
Category : Body kits
Only for MY15 model and before models (not for limited models either). Material: FRP with black gel coating finish, Unpainted (need to get paint job).
Please input your Email address and password.
Japanparts No : 1205G-148-RS500-2
Model :
Delivery time by Air : 10-15 days
Category : LSD & Differential parts
For nismo LSD. Price for 10.
Please input your Email address and password.
Model : S14, S15
Delivery time by Air : 10-15 days
Category : Bushings
Price per a piece, Need 2piece per a car. No.15 part in the picture. Don't Need for HICAS car. Need press machine to install this part. Warning: -Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides. -When replacing the rear link, rear axle-side bush (no. 14 and 15) and suspension mount Bush (no. 16 and 17) should all be replaced with NISMO units at the same time. Replacing only the link will not draw out the full performance potential of the suspension.
Please input your Email address and password.
Model : Z34
Delivery time by Air : 14-21 days
Category : Oil coolers
Spec: - Cold air type - Core: H178xW171 xD76(mm), 9layers, Aluminum - Air guide: Aluminum Contents: - Oil cooler core (with air guide and net) - Stainless mesh hose (with #6 connector and heat-resistance tube) - Inline filter - Oil pump - Harness & switch - Attachment Note: -The "NISMO logo" included in the connector is for product identification, so it does not guarantee the quality in terms of appearance or process deterioration. -The core is anodized to prevent corrosion. As a result, the core fin may appear to be dirty, but there is no problem with performance. -During working of the pump, a loud noise is generated. -The ground clearance of the mounting part drops about 100 mm. -With the installation of the differential oil cooler kit, approximately 1.5 liters of differential oil is required. This product does not contain def oil. -Do not use at temperatures below freezing because there is a possibility of abnormal rise of hydraulic pressure and melting of wiring fuse. For Z34 PN.21600-RRZ46 NISMO Diff oil cooler kit FEATURS: This is an item geared for those who enjoy continuous circuit driving in Fairlady Z (Z34) models. In addition to using a core with superior heat exchanging capacity, air guides can now be set by using a layout optimized for each vehicle model, this kit both increases cooling through the introduction of air into the core and avoids heat damage from the muffler. In addition, a net is included to prevent damage to the core due to flying objects. Furthermore, a dedicated harness and switch allow for ON/OFF control of the oil pump in the cabin.
Please input your Email address and password.
Model : FY33,R33,R34,P11
Delivery time by Air : 10-15 days
Category : Lights
Pair, Material: ABS Resin. For FY33, BCNR33, BNR34(manufactured before oct.'00), P11, P11E, WP11.
Please input your Email address and password.
Model : BNR34
Delivery time by Air : 99- days
Category : Intercooler
H:271mm W:594mm D:100mm. Need some work to install
Please input your Email address and password.
Model : BNR32/ BCNR33
Delivery time by Air : 60-75 days
Category : Intercooler
H:271mm W:594mm D:100mm. Need some work to install
Please input your Email address and password.
Model : R35
Delivery time by Air : 60-75 days
Category : LSD & Differential parts
FRONT L.S.D. for NISSAN GT-R (R35) is developed to facilitate smoother corner entry in line with the cornering improvements gained from installing "GT L.S.D. Pro Carbon" or "GT L.S.D.". As initial torque is set at lower level, chattering noise is not generated. Cam angles: Drive side / Coast side: 45 / 1 Number of plates: 16 Initial torque: 29.4Nm(3kgf.m) Including Fitting Kit (Oil seal, O ring, Gasket, 2x Bearing, LSD oil 2L) To install Front L.S.D., scraping transmission case slightly is required. Please use with GT L.S.D. Pro Carbon(38420-RSR50) or GT L.S.D.(38420-RSR52).
Please input your Email address and password.
Model : R35
Delivery time by Air : 21-28 days
Category : LSD & Differential parts
GT L.S.D. Pro Carbon is specially developed as a wet type differential using carbon fiber cloth Features: GT L.S.D. Pro Carbon is specially developed as a wet type differential using carbon fiber cloth Made to run in an oil bath, the interior discs were coated with a specially developed carbon fiber cloth. The protective qualities of the oil guaranty superior durability and reliability. Managing oil changes and checks is exactly the same as with any other clutch in the GT L.S.D. series. Otherwise, this model works exactly like the GT L.S.D. Pro and has all the same functionalities. *1 *We have done extensive research and development to ensure that any sludge that comes from the were of the carbon fiber facings does not have any significant impact on LSD operation, its related parts or oil. *1 This unit is set for 2-WAY use only. Initial torque setting of 6kgf.m The carbon cloth facings of the GT L.S.D Pro Carbon have been manufactured to meet NISMO's high standards for durability. Significant testing of the LSD series in grip races has shown that 6kgf.m is the optimum level of initial torque for even LSD operation. GT L.S.D Pro Carbon's initial torque is set to LOW (approximately 8kgf.m)*1 at the time of shipping. If usage leads to the initial torque's falling below 6kgf.m, the setting can be changed to MIDDLE or HIGH to preserve the standard level of initial torque without disassembly of the LSD unit. *The carbon facings employed in the GT L.S.D Pro Carbon were designed to produce an initial torque of 6kgf.m Even when the MIDDLE (approx.11kgf.m)*1 or HIGH(approx.17.5kgf.m)*1 settings are used, the initial torque will settle at 6kgf.m after about 100km of driving and remain stable there. Since aware that "pushing" the initial torque will result in excessive wear to the LSD and shorten its lifespan. *1 Values at time of shipping are design standards. Smoother LSD Operation Because of the superior friction to velocity efficiency of carbon facings, stick-slip is limited while power and operational stability are greatly improved. With an LSD performance that is smooth from the start, excellent oil viscosity is maintained and LSD operation is little effected by tire wear or road conditions. Ideal for circuit time attack or street use This LSD's operation was perfected to deliver the maximum grip needed for circuit racing. It will give you superior traction whatever the tire or road conditions. The great stability of the GT L.S.D Pro Carbon "2-WAY" also makes it ideal for normal street use, where road conditions can be poor and where too powerful an LSD can actually reduce efficiency. Compared to the GT L.S.D. and the GT L.S.D. Pro, this is the best choice for street use. Diff type (axle): GR6 Final ratio: 3.700 This kit includes following NISMO or Nissan OEM parts: -Side flange x2 -Side bearing x2 -Oil seal x2 -Bolt x12 -O ring x1 -COMPETITION OIL type 2189E (75W140) 1L x2 -GT L.S.D.Carbon sticker x2
Please input your Email address and password.
Model : R35
Delivery time by Air : 10-15 days
Category : Wheels
Material: Chromoly (SCM435), a set of 4 nuts. M14xP1.5 long type.
Please input your Email address and password.
Who we are
How to order