Model : (R)PS13, S14 for SR20DET
Delivery time by Air : 10-15 days
Category : Clutches & Flywheels
The strongest single clutch: one that can handle the 420ps, SR20DET engine but is still easy to operate. This was the development concept for the SUPER COPPERMIX. With an allowable torque of 54 kgf·m, this is the strongest single clutch Allowable torqueN.m (kgf.m) - Kinetic friction: 530(54) / Static friction: 794(81) Allowable output kW (ps): 309(420) Clutch cover - Pressure N・m (kgf): 9807(1000) - Type: Push Kit Contents: COPPERMIX clutch disc/ Aluminum clutch cover/ Lightweight flywheel/ Flywheel bolts/ Release bearing (genuine Nissan part)/ Sticker Warning: - The sports clutch discs and light weight flywheels, which are designed and manufactured to increase capacity for higher outputand to improve clutch response, may cause the transmission or bearings to make a rumbling noise which is not present when using the original Nissan production parts. Such noise is particularly likely to occur when idling or when accelerating and decelerating at around 2000 rpm. Please be aware that this rumbling is not due to any defect in the parts. - Do not use the SUPER COPPERMIX with a Big Operating Cylinder. This can result in blocking proper disengagemnt of the gears because of insufficient stroke volume.
Please input your Email address and password.
Model : F15/ R35
Delivery time by Air : 10-15 days
Category : Room mirrors
Please input your Email address and password.
Model : Z33(for Ver.S, Ver.ST) /CPV35 (6MT with Brembo) /BNR34 /BCNR33 /BNR32 (V spec, V spec II with Brembo)
Delivery time by Air : 10-15 days
Category : Pads
For CPV35(6M/T), BNR32(V-spec, V-spec II), Z-33(Version S, ST) for use with Brembo calipers and BCNR33, BNR34 Skylines Coefficient of friction: 0.3 - 0.5um Permissible temperature range(rotor suitable temperature): from Ordinary temperature to 500C Application caliper: Nissan OEM caliper Features: NON-ASBESTOS ORIGINAL NON-ASBESTOS FRICTION MATERIAL LESS BRAKING NOISE FOR ALL CLIMATES CLEANER WHEELS
Please input your Email address and password.
Model : S13, S14, S15
Delivery time by Air : 10-15 days
Category : Bushings
Price per a piece, Need 2 pieces No.13 part in the picture. Designs and materials are the same as standard parts hardened rubber.
Please input your Email address and password.
Model : BNR32, BCNR33
Delivery time by Air : 10-15 days
Category : Transmsission mounts
Mount bush assy Qty per car: 1 Features: By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved accelerator response, shift feeling and cornering performance. Spec: Same shape, bolt-on type as standard part. Warning: -Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior. -Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount. -Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters. Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
Please input your Email address and password.
Model : S14, S15
Delivery time by Air : 10-15 days
Category : Control arms & Endlinks
A set of left and right. No.5 part in the picture. Shape and materials are the same as for standard parts. NISMO reinforced Bush have been inserted. Color: silver with NISMO sticker. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
Please input your Email address and password.
Model : Z33,V35,CPV35 VQ35DE
Delivery time by Air : 14-21 days
Category : Clutch hose
Features Compared to the standard rubber hose, stainless steel mesh has a much lower rate of expansion. The Teflon interior of the pipe keeps resistance low and guarantees smooth flow for more direct handling. To facilitate the release of air during clutch maintenance, an adaptor is included in this kit to empty air from the U pipe (the divergence pipe located between the clutch master cylinder and release cylinder in the S13 and R32 series). This can be attached simply by replacing the standard part. Units for V35, CPV35 and Z33 are wrapped with heat-resistance material identical to Genuine.
Please input your Email address and password.
Model : E52/ Z33/ Z34/ F15/ R35/ BNR34
Delivery time by Air : 21-60 days
Category : Mirrors
With Nismo logo. The price is for a set of 2. Please choose the model: Parts number: 9636S-RN2E0 E52 9636S-RNZ30 Z33 9636S-RNZ40 Z34 9636S-RNR50 R35 9636S-RNR40 BNR34
Please input your Email address and password.
Model : P10(2WD), S13, Z32
Delivery time by Air : 60-75 days
Category : Bushings
Price per a piece, Need 2pieces
Please input your Email address and password.
Model : (R)PS13, S14 for SR20DET
Delivery time by Air : 10-15 days
Category : Clutches & Flywheels
Corresponding up to 380ps, Aluminum Cover (Strap Type) /800kgf, Coppermix=240mm(diameter)
Please input your Email address and password.
Who we are
How to order