JDM specialist Japanparts.com

1.3kgf/cm2 (127kpa). TYPE2 RED. For CX-5  KF2P  SH-VPTS  MY(month/year)17/02- DEMIO  DE3FS,DE3AS,DE5FSDEMIO  ZJ-VE,ZY-VEDEMIO  MY(month/year)07/07-14/09

Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Type: For Horizontally-opposed cylinder engine, High pressure type, B-8202, Filter size: φ68xH65, Center bolt size: M20xP1.5 (Vehicle) (Model Year) (Model) (Engine Model) (Stock part No.) WRX S4 14/08- VAG FA20 15208-AA100 WRX STI 14/08- VAB EJ20 15208-AA100 XV 13/11- GP7 FB20 15208-AA100 XV 17/05- GT2,GT3,GT6,GT7 FB16,FB20 15208-AA100 IMPREZA 92/11-00/08 GC1,GC2,GC4,GC6,GC8 EJ15,EJ16,EJ18,EJ20 15208-AA022.etc IMPREZA 00/08-07/06 GD2,GD3,GD9,GDA,GDB EJ15,EJ20 15208-AA100.etc IMPREZA 07/06-09/09 GH2,GH3,GH7,GH8 EL15,EJ20 15208-AA100 IMPREZA 07/10- GRB,GVB EJ20 15208-AA100 IMPREZA 09/02- GRF,GVF EJ25 15208-AA100 IMPREZA G4 13/05- GJ2,GJ3 FB16 15208-AA100 IMPREZA G4 13/05- GJ6,GJ7 FB20 15208-AA100 IMPREZA G4 16/12- GK2,GK3,GK6,GK7 FB16,FB20 15208-AA100 IMPREZA SPORT 13/05- GP2,GP3 FB16 15208-AA100 IMPREZA SPORT 13/05-16/12 GP6,GP7 FB20 15208-AA100 IMPREZA SPORT 16/12- GT2,GT3,GT6,GT7 FB16,FB20 15208-AA100 IMPREZA SPORT WAGON 92/11-00/08 GFA,GF1,GF2,GF3,GF4,GF5,GF6,GF8 EJ15,EJ16,EJ18,EJ20 15208-AA022.etc IMPREZA SPORT WAGON 00/08-07/06 GG2,GG3,GG9,GGA,GGB EJ15,EJ20 15208-AA080.etc EXIGA 08/06- YA4,YA5 EJ20 NA 15208-AA100 EXIGA 08/06-15/03 YA5 EJ20 Turbo 15208-AA100 EXIGA 12/07-15/03 YAM FB25 15208-AA100 EXIGA CROSSOVER 7 15/04- YAM FB25 15208-AA100 BLITZ RACING OIL FILTER features: Durability performance higher than specified in the JIS standard impulse durability test. Specially designed to maximize the filtration performance of the filter itself. Increased the filter strength. Lineup for various vehicle types. There is a range of fitments including popular Toyota, Subaru, Mitsubishi, Nissan, Honda, Mazda and Lexus engines.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) C-HR 4WD / 12.2016-05.2018 / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50 C-HR 2WD / 12.2016-05.2018 / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40 C-HR 4WD / 05.2018- / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50 C-HR 2WD / 05.2018- / NGX10 / 8NR-FTS / -2° 30' - -1° 30'* / -105 - -35 C-HR 2WD / 05.2018- / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40 CAMRY 2WD / 07.2017- / AXVH70 / A25A-FXS / -2° 30' - -1° 30'* / -84 - -22 COROLLA SPORT 2WD / 06.2018- / NRE210H / 8NR-FTS / -2° 30' - -1° 30'* / -77 - -15 COROLLA SPORT 4WD / 06.2018- / NRE214H / 8NR-FTS / -2° 30' - -1° 30'* / -106 - -41 COROLLA SPORT 2WD / 06.2018- / ZWE211H / 2ZR-FXE / -2° 30' - -1° 30'* / -77 - -15 COROLLA TOURING 2WD / 10.2019- / NRE210W / 8NR-FTS COROLLA TOURING 2WD / 10.2019- / ZRE212W / 2ZR-FAE COROLLA TOURING 2WD / 10.2019- / ZWE211W / 2ZR-FXE PRIUS 2WD / 12.2015-12.2018 / ZVW50 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 2WD / 12.2015-12.2018 / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 4WD, E-Four / 12.2015-12.2018 / ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 2WD / 12.2018- / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 4WD, E-Four / 12.2018-/ ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS PHV / 02.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35 PRIUS PHV GR SPORT / 09.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35 * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Core Type : Type-E(BR) Core Size (WxHxD-Row): 230x173x50-12 Core Location: in front of radiator Thermostat: attachment included Air Guide: ○ Remarks: For the model before minor change,For both of MT and AT,Including exclusive attachment For 86, ZN6, FA20 engine, MY 04/2012 - 07/2016

Spec: Core Type : Type-E(BR) Core Size (WxHxD-Row): 230x173x50-12 Core Location: in front of radiator Thermostat: attachment included Air Guide: ○ Remarks: Including exclusive attachment For BRZ, ZC6, FA20 engine, MY 03/2012 - 07/2016, Zenki(earlier) model, MT & AT

1.3kgf/cm2 (127kpa). TYPE1 BLUE. For 180SX, RS13/KRS13, CA18DET, MY 03/1989-01/1991 180SX, RPS13/KRPS13, SR20DE/SR20DET, MY 01/1991- SILVIA, S13/KS13, CA18DE/CA18DET, MY 05/1988-01/1991 SILVIA, PS13/KPS13,SR20DE/SR20DET, MY 01/1991/-10/1993 SILVIA, S14/CS14, SR20DE/SR20DET, MY 10/1993-01/1999 SILVIA, S15, SR20DE/SR20DET, MY 01/1999- SKYLINE GT-R,BNR32, RB26DETT, MY 08/1989-01/1995 SKYLINE GT-R,BCNR33, RB26DETT, MY 01/1995-01/1999 SKYLINE GT-R,BNR34, RB26DETT, MY 01/1999- SERENA, C26/NC26/FNC26/HC26/HFC26,MR20DD, MY 08/2012-08/2016 SERENA, C27/GC27/GFC27/GNC27/GFNC27, MR20DD, MY 08/2016- DAYS, B21W, 3B20, MY 04/2014-