JDM specialist Japanparts.com

For BLITZ DAMPER ZZ-R series. Camber adjustable range: -3° 30' - + 1° 00' Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(DAMPER ZZ-R Code No.) ALTO 2WD / 12/2014- / HA36S HA36V / R06A(NA) / 92535 ALTO 4WD / 12/2014- / HA36S HA36V / R06A(NA) / 92536 ALTO TURBO RS 2WD / 03/2015- / HA36S / R06A(Turbo) / 92348 ALTO TURBO RS 4WD / 03/2015- / HA36S / R06A(Turbo) / 92361 ALTO WORKS 2WD / 12/2015- / HA36S / R06A(Turbo) / 92348 ALTO WORKS 4WD / 12/2015- / HA36S / R06A(Turbo) / 92361 BLITZ MIRACLE CAMBER ADJUSTER Features: - The camber angle of the suspension can be freely and easily changed, DAMPER ZZ-R series dedicated option bracket. -And for a front corresponding to the strut type suspension, set by vehicle type and for rear mounting on the lower arm mounting portion. - By moving the hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, simple and can be adjusted camber wide range stepless. - Freely by the camber angle can be adjusted, optimized ground conditions of the tire during low down width of alignment is widened, improving driving performance, suppression of uneven wear, also adjustment at wide wheel mounting easy. - Stay to secure the brake hose and ABS line is also standard equipment. Possible bolt mounted so Some models are also optimized mounting position of the stabilizer link.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) LEXUS ES / 10.2018- / AXZH10 / A25A-FXS / -2° 30' - -1° 30'* / -80 - -19 LEXUS UX 2WD / 11.2018- / MZAA10 / M20A-FKS / -2° 30' - -1° 30'* / -100 - -40 LEXUS UX Hybrid 2WD / 11.2018- / MZAH10 / M20A-FXS / -2° 30' - -1° 30'* / -100 - -40 * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) C-HR 4WD / 12.2016-05.2018 / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50 C-HR 2WD / 12.2016-05.2018 / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40 C-HR 4WD / 05.2018- / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50 C-HR 2WD / 05.2018- / NGX10 / 8NR-FTS / -2° 30' - -1° 30'* / -105 - -35 C-HR 2WD / 05.2018- / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40 CAMRY 2WD / 07.2017- / AXVH70 / A25A-FXS / -2° 30' - -1° 30'* / -84 - -22 COROLLA SPORT 2WD / 06.2018- / NRE210H / 8NR-FTS / -2° 30' - -1° 30'* / -77 - -15 COROLLA SPORT 4WD / 06.2018- / NRE214H / 8NR-FTS / -2° 30' - -1° 30'* / -106 - -41 COROLLA SPORT 2WD / 06.2018- / ZWE211H / 2ZR-FXE / -2° 30' - -1° 30'* / -77 - -15 COROLLA TOURING 2WD / 10.2019- / NRE210W / 8NR-FTS COROLLA TOURING 2WD / 10.2019- / ZRE212W / 2ZR-FAE COROLLA TOURING 2WD / 10.2019- / ZWE211W / 2ZR-FXE PRIUS 2WD / 12.2015-12.2018 / ZVW50 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 2WD / 12.2015-12.2018 / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 4WD, E-Four / 12.2015-12.2018 / ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 2WD / 12.2018- / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS 4WD, E-Four / 12.2018-/ ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35 PRIUS PHV / 02.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35 PRIUS PHV GR SPORT / 09.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35 * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) TOYOTA 86 / 04.2012- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 unconfirmed 86 with OEM 16inch wheel 86 GR / 12.2017- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 86 GR SPORT / 07.2018- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 Camber adjustable. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) BRZ / 03.2012- / ZC6 / FA20 / -5° 00' - -2° 00' / -80 - -30 Fitment unconfirmed BRZ with OEM 16inch wheel WRX S4 / 08.2014- / VAG / FA20 / -5° 00' - -2° 00' / -60 - -20 WRX STI / 08.2014- / VAB / EJ20 / -5° 00' - -2° 00' / -60 - -5 WRX STI / 08.2014- / VAF / EJ25 / -5° 00' - -2° 00' / -60 - -5 USA model IMPREZA / 10.2007- / GRB / EJ20 / -5° 00' - -2° 00' / -80 - -30 Fitment unconfirmed IMPREZA with OEM 17inch wheel IMPREZA / 02.2009- / GRF / EJ25 / -5° 00' - -2° 00' / -80 - -30 Fitment unconfirmed IMPREZA with OEM 17inch wheel IMPREZA / 07.2010- / GVB / EJ20 / -5° 00' - -2° 00' / -80 - -30 Fitment unconfirmed IMPREZA with OEM 17inch wheel IMPREZA / 10.2007- / GVF / EJ25 / -5° 00' - -2° 00' / -80 - -30 Fitment unconfirmed IMPREZA with OEM 17inch wheel LEVORG / 06.2014- / VM4 VMG / FB16 FA20 / -5° 00' - -2° 00' / -70 - -20 Fitment unconfirmed LEVORG with OEM 17inch wheel Camber adjustable. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) ALPHARD 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 * ALPHARD 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 * VELLFIRE 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 * VELLFIRE 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 * Remarks: Please install using the included spring. OEM stock wheel cannot be installed. Can be installed on side lift up seats Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required. * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) ALPHARD 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 * ALPHARD 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 4WD / 01.2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -35 * ALPHARD HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 * ALPHARD HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 * VELLFIRE 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -35 * VELLFIRE 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 4WD / 01/2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 * VELLFIRE HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 * Remarks: Please install using the included spring. OEM stock wheel cannot be installed. Can be installed on side lift up seats Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required. * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For Turbo. Pipe size; center 80mm, tail 114.3mm. 92/11-00/08 GC8 EJ20T. Shown picture is image.

Tip Piece: 4 Position: LS & RS Design: Circle, Inner curl Tip Material: Titanium Tip O.D.: 114.3-2.5R Pipe Size: 80-70×4 Consist of: 2 Close Sound Level (OEM/BLITZ): 89 / 92 For GT-R, R35, VR38DETT engine, MY 12/2007 - 12/2009 Remarks: Compatibility unconfirmed for SpecV NUR-SPEC C-Ti Quad Model Features: - "Quad Model" (4 tails). Based on the Nur-spec C-ti muffler, which is combination of high-quality, durable stainless steel body and a lightweight titanium tail. - For some models, rear diffuser (aero parts) are available to equip the quad muffler.

Tip Piece: 4 Position: LS & RS Design: Circle, Inner curl Tip Material: Titanium Tip O.D.: 114.3-2.5R Pipe Size: 80-60×2 Consist of: 2 Close Sound Level (OEM/BLITZ): 89 / 94 For LANCER EVO X, CZ4A, 4B11 MIVEC engine, MY 10/2007 - Remarks: For SST, For the vehicles equipped BLITZ Rear Diffuser, Meets new Japanese regulation NUR-SPEC C-Ti Quad Model Features: - "Quad Model" (4 tails). Based on the Nur-spec C-ti muffler, which is combination of high-quality, durable stainless steel body and a lightweight titanium tail. - For some models, rear diffuser (aero parts) are available to equip the quad muffler.