Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 4.0 / 4.0
Free length F/R: 220 / 255
Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring
Height adjustment range F/R: -70 to 0 / -52 to -20
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: x
Extension dial with the product: x
Stabilizer link with the product F/R: FF / x
BRAIN connection: ○ It may not fit, depends on manufacture year. Please check the chart on BLITZ HP.
The data is for PRIUS, ZVW55, 2ZR-FXE engine, MY 12/2015 -
For
ZVW55, 2ZR-FXE, MY 12/2015 -, Remarks: 4WD,E-Four
ZVW52, 2ZR-FXE, MY 02/2017 -
ZVW52, 2ZR-FXE, MY 09/2017 -
Optional parts
DSC PLUS GPS sensor kit is listed as 135-055-999
DSC PLUS remote switch is listed as 135-055-998
BLITZ DAMPER ZZ-R SpecDSC PLUS Features:
G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle.
-Equipped with "Full Auto" mode.
-Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions.
-2.5-inch VA liquid crystal display.
-Damping force of four wheels can be displayed at any time.
-More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size.
-Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed.
-In addition to real-time display of G, peak display is also possible, which is convenient for setting.
-A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control.
-The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup.
-Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness.
-With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
For LC500, URZ100, 2UR-GSE engine, MY 03/2017 -
For LC500h, GWZ100, 8GR-FXS engine, MY 04/2017 -
BLITZ BRAKE HOLD JUMPER Features:
- BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake.
-The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt.
- Designed exclusively for vehicle types.
- Includes short parts for wiring connection.
- For the time the brake hold function is not required, you can return to normal control with simple operation.
NOTE:
- Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model.
- Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back)
- Do not overestimate the brake hold function and be careful to always operate the brake and handle.
- Wiring processing is required to connect the seat belt signal line.
For ALPHARD, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For ALPHARD HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For VELLFIRE, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For VELLFIRE HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For both of Zenki and Koki (ealier model and later model)
BLITZ BRAKE HOLD JUMPER Features:
- BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake.
-The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt.
- Designed exclusively for vehicle types.
- Includes short parts for wiring connection.
- For the time the brake hold function is not required, you can return to normal control with simple operation.
NOTE:
- Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model.
- Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back)
- Do not overestimate the brake hold function and be careful to always operate the brake and handle.
- Wiring processing is required to connect the seat belt signal line.
Spec:
Caliper: Aluminum forged 6POT in metallic red
Disc: φ355 / 2pc, with slit
Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ
Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20.
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
SPEC:
Core type:A1C
For FORESTER, SF5, EJ205 engine, MY 09/1998 - 02/200
Remarks: For Turbo2
FEATURES OF THE BLITZ CARBON POWER AIR CLEANER:
- Achieved high suction efficiency by a stainless steel mesh filter that has been proven with Suspower / Advance Power.
- M-folded cone-shaped body that can maximize suction area. High level balance of dust collection performance and suction efficiency.
- The carbon shield with the large diameter funnel blocks the radiant heat and prevents the heat generation of the filter main body, and reduces the intake air temperature rise.
- Reduces heat generation of the shield itself by made of carbon.
- Dress up the engine room with a combination of carbon shield and red alumite.
- The filter part can be washed. Its performance continues semi-permanently.,
It can work onto: sound creator/non sound creator/ normal air cleaner. Bolt on.
Choose the model and color
(#55703) Blue for Zenki(ealier) model M/T MY 03/2012-07/2016
(#55723) Red for Zenki(ealier) model M/T MY 03/2012-07/2016
(#55714) Blue for Koki(later) model M/T MY 08/2016 -
(#55734) Red for Koki(later) model M/T MY 08/2016 -
(#55703) Blue for A/T
(#55723) Red for A/T
BLITZ SUCTION KIT Features:
By reconsidering the shape of the stock suction, internal resistance is reduced, suction efficiency is improved, and engine response is improved.
Bolt-on installation is possible with exclusive design.
Durability and safety are improved by aluminum main body and blue (or red) silicon for the joint.
Sporty engine room is nice.
0 Item
Please reload your browser if the view type does not change.
