Compared to the OEM sway bar end links, these feature high rigidity along with low friction and play thanks to the use of high quality spherical bearings. Improve the effectiveness of your sway bars, either OEM or aftermarket, with these end links.
These end links allow for the sway bar to act sooner than with original units. Even the slightest movement of the vehicle chassis is directly transmitted to the sway bars instantly, rather than being lost to play and flex as found in stock end links, giving a greater feeling of control and linearity to the handling. All are sold as 2 unit sets (suitable for the front or rear of a vehicle). *M12 Bolt vehicle only.
Please choose the color.
Parts number:
82601DM2K1X CRYSTAL WHITE PEARL
82601DM2G1U ICE SILVER METALLIC
82601DM261K DARK GRAY METALLIC
82601DM2D4S CRYSTAL BLACK SILICA
82601DM2C7P LIGHTNING RED
82601DM2K7X WR BLUE PEARL
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Strengthened chrome molly I section connecting-rods are included.
Spec:
Bore x Stroke: 87.00x90.7mm
Displacement: 2157cc
Crown Volume(*1): 4.35cc/10.3cc
Projection Height: +1.0mm(from the deck of the block)
Reference C/R (*2): Standard head GK t=0.6mmξ≈12.11:1
Based on standard piston pin diameter.
(*1):Crown volume is measured "from the piston shoulder"/"from the deck of the block".
(*2):The compression ratio given above are only to be taken as a guide, measurements are required.
Kit Contents:
1.TODA forged piston KIT ø87.00mm(2157cc)
2.Special crankshaft (Long stroke, High accuracy dynamic balanced)
3. I section chrome molly connecting-rods (Fully floating with Bush & balanced)
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Strengthened chrome molly I section connecting-rods are included.
Spec:
Bore x Stroke: 87.50x90.7mm
Displacement: 2182cc
Crown Volume(*1): 4.35cc/10.4cc
Projection Height: +1.0mm(from the deck of the block)
Reference C/R (*2): Standard head GK t=0.6mmξ≈12.25:1
Based on standard piston pin diameter.
(*1):Crown volume is measured "from the piston shoulder"/"from the deck of the block".
(*2):The compression ratio given above are only to be taken as a guide, measurements are required.
Kit Contents:
1.TODA forged piston KIT ø87.50mm(2182cc)
2.Special crankshaft (Long stroke, High accuracy dynamic balanced)
3. I section chrome molly connecting-rods (Fully floating with Bush & balanced)
0 Item
Please reload your browser if the view type does not change.
