Only for EJ20 STi version 5-6, SF5/B-D (Impossible to use with TRC models) and BE5/BH5 (Impossible to use with TRC models). Boost pressure (accelerator off time) goes back to suction as stock. Material: Aluminum die casting
Spec:
Mount F/R: Adjustable pillow / Reinforced rubber
Rate F/R(kgf/mm): 6.0 / 4.0
Free length F/R: 200 / 220
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -70 to 0 / -60 to 0
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: 200mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required.
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For IMPREZA, GDA, EJ20 engine, MY 08/2000 - 06/2007
Remarks: A-G型(P.C.D 100), Sound gets louder due to pillow upper mounts
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, <a href=https://www.blitz.co.jp/products/suspension/damper_zz-r.html target="new">Click here</a> to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
For ALPHARD, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For ALPHARD HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For VELLFIRE, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For VELLFIRE HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For both of Zenki and Koki (ealier model and later model)
BLITZ BRAKE HOLD JUMPER Features:
- BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake.
-The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt.
- Designed exclusively for vehicle types.
- Includes short parts for wiring connection.
- For the time the brake hold function is not required, you can return to normal control with simple operation.
NOTE:
- Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model.
- Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back)
- Do not overestimate the brake hold function and be careful to always operate the brake and handle.
- Wiring processing is required to connect the seat belt signal line.
Spec:
Caliper: Aluminum forged 6POT in metallic red
Disc: φ355 / 2pc, with slit
Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ
Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
For BRZ Model ZC6, Eng. FA20.
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Tip Piece: 4
Position: LS & RS
Design: Circle, Inner curl
Tip Material: Stainless
Tip O.D.: 101.6-2.5R
Pipe Size: 60-60×4
Consist of: 2
Close Sound Level (OEM/BLITZ): 82 / 94
For 86, ZN6, FA20 engine, MY 04/2012 -
Remarks: For vehicles equipped TRD rear bumper spoiler/TRD rear garnish, For the model before M/C and after M/C , For MT , Meets new Japanese regulation
NUR-SPEC VS Features:
- The polished sus304 tail produces an elegant rear view
- Reasonable price
- For some models, "Quad Model", 4 tails in the left and right is also available.
- 2.5 R Curl Tail design meets new exterior technology standards
Tip Piece: 2
Position: LS & RS
Design: Circle, Inner curl
Tip Material: Stainless
Tip O.D.: 114.3-2.5R
Pipe Size: 60-50×2
Consist of: 2
Close Sound Level (OEM/BLITZ): 82 / 90
For BRZ, ZC6, FA20 engine, MY 03/2012 -
Remarks: For the model before M/C and after M/C , Also for the vehicles equipped rear under diffuser, Meets new Japanese regulation
NUR-SPEC VS Features:
- The polished sus304 tail produces an elegant rear view
- Reasonable price
- For some models, "Quad Model", 4 tails in the left and right is also available.
- 2.5 R Curl Tail design meets new exterior technology standards
SPEC:
Core type:E2
For IMPREZA SPORT WAGON, GGB,GGA, EJ20 engine, MY 08/2000 - 06/2007
Remarks: For Turbo
Here is a link for replacement filter.
<a href=https://www.japanparts.com/parts/detail/54242 target="new">Core type: E1 E2</a>
FEATURES OF THE BLITZ SUS POWER AIR AIR CLEANER CORE-TYPE LM:
- Reasonable price core type cleaner kit.
- Filter color is Red. Blue and red 2 lineup. Excellent fashionability.
- Replaceable with dry special fiber.
- Combined with stainless steel realizes high durability and strength.
- Replacement filters are available in blue and red.
- Newly developed BLITZ´s original special two-layer fiber filter enhances high dust collection efficiency and suction efficiency.
- Compatible models More than 140 domestic models.
- Color variation- blue and red.,
SPEC:
Core type:A1
For IMPREZA, GRB, EJ20 engine, MY 10/2007 -
FEATURES OF THE BLITZ ADVANCE POWER AIR CLEANER:
- Evolved core type air cleaner which combines the suction efficiency of SUS POWER AIR CLEANER and the heat resistance performance of SONIC POWER AIR CLEANER.
- High intake efficiency and the sporty sound by the stainless mesh filter of "SUS POWER AIR CLEANER".
- Cooling shield with the large diameter funnel blocks the radiant heat and prevents the heat generation of the filter.
- Stable suction temperature by suppressing the temperature rise.
- It works effectly on instantaneous increase of intake air by the variable shield structure.
- Large diameter funnels efficiently supply large amounts of air.
- Dress up the engine room sporty by the cooling shield made of aluminum and the lock plate anodized in blue.
0 Item
Please reload your browser if the view type does not change.
