Core Size/ Row: 200 x 132 x 48/ 10-layer
Core Location: Inside rear under cover
Remarks: Vehicle modification is required. If stabilizer is installed, it may come in contact with a core. Compatiblity with non-HKS and non-stock muffler is not confirmed.
Differential Oil Cooler Kit for R35 GT-R is released now. High performance vehicle R35 GT-R's differential oil temperature tends to be very high under severe conditions such as circuit driving. High differential oil temperature may affect on the lubricant performance and/or LSD's performance maintenance. HKS Diff Oil Cooler Kit was developed to solve these problems. HKS Diff Oil Cooler can maintain the differential oil temperature and prevent the oil degradation.
<a href="http://www.hks-power.co.jp/en/product/cooling/diff/index.html" target="_blank">
Check HKS page for details</a>
For R35 VR38DETT engine, MY 2007/12-2010/10
Spec:
- Cold air type
- Core: H178xW171 xD76(mm), 9layers, Aluminum
- Air guide: Aluminum
Contents:
- Oil cooler core (with air guide and net)
- Stainless mesh hose (with #6 connector and heat-resistance tube)
- Inline filter
- Oil pump
- Harness & switch
- Attachment
Note:
-The "NISMO logo" included in the connector is for product identification, so it does not guarantee the quality in terms of appearance or process deterioration.
-The core is anodized to prevent corrosion. As a result, the core fin may appear to be dirty, but there is no problem with performance.
-During working of the pump, a loud noise is generated.
-The ground clearance of the mounting part drops about 100 mm.
-With the installation of the differential oil cooler kit, approximately 1.5 liters of differential oil is required. This product does not contain def oil.
-Do not use at temperatures below freezing because there is a possibility of abnormal rise of hydraulic pressure and melting of wiring fuse.
For Z34 PN.21600-RRZ46
NISMO Diff oil cooler kit FEATURS:
This is an item geared for those who enjoy continuous circuit driving in Fairlady Z (Z34) models.
In addition to using a core with superior heat exchanging capacity, air guides can now be set by using a layout optimized for each vehicle model, this kit both increases cooling through the introduction of air into the core and avoids heat damage from the muffler. In addition, a net is included to prevent damage to the core due to flying objects. Furthermore, a dedicated harness and switch allow for ON/OFF control of the oil pump in the cabin.
1pc.
Filler bolts that are lightweight by using a duralumin alloy.
Remarks - Incompatible with temperature sensor
Impreza GC/GF, Applied model A-G, MY 11.1992-8.2000, Turbo model
Impreza GD/GG, Applied model A-B, MY 09.2000-10.2002, Turbo model
Legacy BL5/BP5, Applied model A-E, MY 05.2003-, 5MT
Outback BP9, Applied model A-E, MY 05.2003-, 4AT
Legacy BLE/BPE, Applied model A-E, MY 05.2003-, 3.0R 6MT
Legacy BE/BH, Applied model A-D, MY 06.1998-04.2003, Turbo model
Legacy BD/BG, Applied model A-C, MY 10.1993-05.1998, Turbo model
Forester SG, Applied model A-F, MY 02.2002-, Turbo model
Forester SF, Applied model A-D, MY 021997-01.2002, all model
0 Item
Please reload your browser if the view type does not change.
