Right side fixed.
Spec:
Same materials and design as standard part; bolt-on type.
Features:
A hardened mount bush for attaching the steering gear to the member (body). By increasing the hardness of the mount bush rubber, extra motion of the steering gear is restrained, so steering response is improved, with a more direct feel and more minute steering information transmitted to the driver.
Warning:
- Compared to standard steering, minute bumps in the road and other unevenness will be transferred to the steering wheel.
- Steering may feel more heavy than with standard steering parts.
Features
NISMO Low-Temp Thermostat allows the radiator valve to achieve a lower temperature opening at 62℃ (Standard = 76.5℃). This promotes earlier coolant circulation inside the engine, reducing the power loss caused by rising coolant temperature during high speed driving at a racetrack. The valve opening temperature is set lower to within the vicinity of the threshold valve where a rich mixture boost for a low temperature condition would be triggered.
Product Warning
When the air temperature is low, such as during winter, the temperature of the water within the engine will not quickly rise, resulting in reduced interior heater performance.
Material: Silver color - SUS, Black color - Aluminum
Size: W100mm x H25mm
Double tape. No good for car's exterior.
Parts number:
99993-RN209 Silver color
99993-RN211 Black color
A set of left and right side.
No.9 part in the picture.
Shape and materials are the same as for standard parts.
NISMO reinforced Bush have been inserted.
Color: silver with NISMO sticker
effective length extended. Installation is possible in only HICAS-equipped vehicles. When car is to be used on public roads, an application for modification is required (in Japan; local laws may vary). Clearance of tires, fenders, etc. will change after installation.
Warning:
Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
0 Item
Please reload your browser if the view type does not change.
