JDM specialist Japanparts.com

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Civic Sedan, MY 09/2017 -, Model FC1, Eng. L15B, For Civic Hatchback, MY 09/2017 -, Model FK7, Eng. L15C. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Swift Sports, MY 09/2017 -, Model ZC33S, Eng. K14C. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For WRX STI Model VAB, Eng.FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330mm / 1Piece, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For COROLLA SPORT, Model NRE210H NRE214H ZWE211H, Eng.8NR-FTS 2ZR-FXE , MY 06/2018 - For PRIUS, Model ZVW50 ZVW51 ZVW55 , Eng.2ZR-FXE , MY 12/2015 - Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

For RX300 Koki (later model), AGL20W AGL25W, 8AR-FTS engine, MY 08/2019 - BLITZ BRAKE HOLD JUMPER Features: - BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake. -The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt. - Designed exclusively for vehicle types. - Includes short parts for wiring connection. - For the time the brake hold function is not required, you can return to normal control with simple operation. NOTE: - Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model. - Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back) - Do not overestimate the brake hold function and be careful to always operate the brake and handle. - Wiring processing is required to connect the seat belt signal line.

For LC500, URZ100, 2UR-GSE engine, MY 03/2017 - For LC500h, GWZ100, 8GR-FXS engine, MY 04/2017 - BLITZ BRAKE HOLD JUMPER Features: - BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake. -The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt. - Designed exclusively for vehicle types. - Includes short parts for wiring connection. - For the time the brake hold function is not required, you can return to normal control with simple operation. NOTE: - Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model. - Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back) - Do not overestimate the brake hold function and be careful to always operate the brake and handle. - Wiring processing is required to connect the seat belt signal line.

For NX200t , AGZ10 AGZ15, 8AR-FTS engine, MY 07/2014 - 09/2017 For NX300, AGZ10 AGZ15, 8AR-FTS engine, MY 09/2017 - For NX300h, AYZ10 AYZ15, 2AR-FXE engine, MY 07/2014 - For RX200t, AGL20W AGL25W, 8AR-FTS engine, MY 10/2015 - 09/2017 For RX300, AGL20W AGL25W, 8AR-FTS engine, MY 09/2017 - For RX450h, GYL20W GYL25W, 2GR-FXS engine, MY 10/2015 - BLITZ BRAKE HOLD JUMPER Features: - BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake. -The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt. - Designed exclusively for vehicle types. - Includes short parts for wiring connection. - For the time the brake hold function is not required, you can return to normal control with simple operation. NOTE: - Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model. - Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back) - Do not overestimate the brake hold function and be careful to always operate the brake and handle. - Wiring processing is required to connect the seat belt signal line.

For C-HR, NGX50 ZYX10, 8NR-FTS 2ZR-FXE engine, MY 12/2016 - BLITZ BRAKE HOLD JUMPER Features: - BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake. -The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt. - Designed exclusively for vehicle types. - Includes short parts for wiring connection. - For the time the brake hold function is not required, you can return to normal control with simple operation. NOTE: - Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model. - Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back) - Do not overestimate the brake hold function and be careful to always operate the brake and handle. - Wiring processing is required to connect the seat belt signal line.