JDM specialist Japanparts.com

Corresponding up to 380ps, Aluminum Cover (Strap Type) /800kgf, Coppermix=240mm(diameter)

Corresponding up to 380ps, Aluminum Cover (Strap Type) /800kgf, Coppermix=240mm(diameter). As for S15　6MT, the Dual mass flywheel (with damper spring) is installed. When clutches are exchanged, the allophone is generated. Because the flywheel of Nismo is a solid type.

Features: Core wires of tempered glass fiber, with the tooth fabric made of aramid fiber for immediate improvement in resistance to stretch, heat, cutting, tooth loss and abrasion. The result is greater endurance to the high heat, sudden change in rpm and torque that occurs with a tuning engine, so that maximum potential of the engine can be realized. Identical shape as genuine NISSAN part. Comparison with genuine NISSAN timing belt: Strength resistance 1.2 times greater; heat resistance 1.8 times; cut resistance 3 times; tooth loss and abrasion resistance 9 times.

Material: Titanium. Weight: 1.5kg. Comes with NISMO log plate (stainless). Please choose your model from (#54420-RSR22) BNR32 or (#54420-RSR42) BCNR33 or BNR34

Left/right, one set. Cannot be used with Circuit Link Set. The standard brake air guide can not be installed. Because of the tension rod set (No.3) has no bracket for the installation. when installing, the clips (Genuine Nissan part 41184-24U00, four units) are required. Please purchase separately.

A set of left and right. No.1 in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.

A set of left and right. No.1 part in the picture. NISMO reinforced Bush have been inserted. Color: silver with NISMO sticker. ** The stock brake air guide can not be installed. Because of the tension rod set (No.1) has no bracket for the installation. when installing, the clips ( Genuine Nissan part 41184-24U00, four units) are required. Please purchase separately. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.

Spec: - Cold air type - Core: H178xW171 xD76(mm), 9layers, Aluminum - Air guide: Aluminum Contents: - Oil cooler core (with air guide and net) - Stainless mesh hose (with #6 connector and heat-resistance tube) - Inline filter - Oil pump - Harness & switch - Attachment Note: -The "NISMO logo" included in the connector is for product identification, so it does not guarantee the quality in terms of appearance or process deterioration. -The core is anodized to prevent corrosion. As a result, the core fin may appear to be dirty, but there is no problem with performance. -During working of the pump, a loud noise is generated. -The ground clearance of the mounting part drops about 100 mm. -With the installation of the differential oil cooler kit, approximately 1.5 liters of differential oil is required. This product does not contain def oil. -Do not use at temperatures below freezing because there is a possibility of abnormal rise of hydraulic pressure and melting of wiring fuse. For Z34 PN.21600-RRZ46 NISMO Diff oil cooler kit FEATURS: This is an item geared for those who enjoy continuous circuit driving in Fairlady Z (Z34) models. In addition to using a core with superior heat exchanging capacity, air guides can now be set by using a layout optimized for each vehicle model, this kit both increases cooling through the introduction of air into the core and avoids heat damage from the muffler. In addition, a net is included to prevent damage to the core due to flying objects. Furthermore, a dedicated harness and switch allow for ON/OFF control of the oil pump in the cabin.

A set of left and right. No.3 part in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.

A set of left and right side. No.3 part in the picture. Shape and materials are the same as for standard parts. NISMO reinforced Bush have been inserted. Color: silver with NISMO sticker. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.