BLITZ DAMPER ZZ-R SpecDSC PLUS Features:
G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle.
-Equipped with "Full Auto" mode.
-Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions.
-2.5-inch VA liquid crystal display.
-Damping force of four wheels can be displayed at any time.
-More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size.
-Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed.
-In addition to real-time display of G, peak display is also possible, which is convenient for setting.
-A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control.
-The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup.
-Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness.
-With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
BLITZ DAMPER ZZ-R SpecDSC PLUS Features:
G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle.
-Equipped with "Full Auto" mode.
-Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions.
-2.5-inch VA liquid crystal display.
-Damping force of four wheels can be displayed at any time.
-More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size.
-Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed.
-In addition to real-time display of G, peak display is also possible, which is convenient for setting.
-A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control.
-The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup.
-Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness.
-With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Model : AGH30W and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
ALPHARD 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 *
ALPHARD 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 *
VELLFIRE 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 *
VELLFIRE 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 *
Remarks:
Please install using the included spring.
OEM stock wheel cannot be installed.
Can be installed on side lift up seats
Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required.
* The camber adjustable range is the measured value when the camber is adjusted only with this product.
* The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed.
* MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
Model : AGH35W and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
ALPHARD 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 *
ALPHARD 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 4WD / 01.2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -35 *
ALPHARD HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 *
ALPHARD HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 *
VELLFIRE 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -35 *
VELLFIRE 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 4WD / 01/2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 *
VELLFIRE HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 *
Remarks:
Please install using the included spring.
OEM stock wheel cannot be installed.
Can be installed on side lift up seats
Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required.
* The camber adjustable range is the measured value when the camber is adjusted only with this product.
* The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed.
* MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
RED. For CX-3, DK5FW,DK5AW, S5-DPTS engine, MY 02/2015 -
For DEMIO, DJ5FS,DJ5AS, S5-DPTS engine, MY 10/2014 -
BLITZ SUCTION KIT Features:
- By reconsidering the shape of the stock suction, internal resistance is reduced, suction efficiency is improved, and engine response is improved.
- Bolt-on installation is possible with exclusive design.
- Durability and safety are improved by aluminum main body and blue (or red) silicon for the joint.
- Sporty engine room is nice.
55706 BLUE has been discontinued.
Only for EJ20 (As for BP/BL Legacy, engine cover need some modification to install). Boost pressure (accelerator off time) goes to air. Ordering return parts kit (135-001-009) and change venturi funnel and return pipe makes return type. Material: Aluminum die casting
0 Item
Please reload your browser if the view type does not change.
