Model : ZD8/ZC6
Delivery time by Air : 50-65 days
Category : Rotors/ Calipers
4POT-S caliper. Disc: diameter 330/1 piece. Pad type: STREET.
Please input your Email address and password.
Model : Universal fit
Delivery time by Air : 10-15 days
Category : Coilovers
Optional part for DAMPER ZZ-R SpecDSC PLUS. With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Previous part number was 15235.
Please input your Email address and password.
Model : AXZH10 and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) LEXUS ES / 10.2018- / AXZH10 / A25A-FXS / -2° 30' - -1° 30'* / -80 - -19 LEXUS UX 2WD / 11.2018- / MZAA10 / M20A-FKS / -2° 30' - -1° 30'* / -100 - -40 LEXUS UX Hybrid 2WD / 11.2018- / MZAH10 / M20A-FXS / -2° 30' - -1° 30'* / -100 - -40 * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
Please input your Email address and password.
Model : Universal fit
Delivery time by Air : 14-21 days
Category : Exhaust tips
NUR-SPEC CUSTOM EDITION option part. Tail Diameter: φ101.6 Insertion diameter: φ52 Tip Material: Stainless, mirror finished
Please input your Email address and password.
Model : GC8/GF8 Sti version 5-6/ SF5/B-D/ BE5/BH5
Delivery time by Air : 10-15 days
Category : Blow off
Only for EJ20 STi version 5-6, SF5/B-D (Impossible to use with TRC models) and BE5/BH5 (Impossible to use with TRC models). Boost pressure (accelerator off time) goes back to suction as stock. Material: Aluminum die casting
Please input your Email address and password.
Model : F15, Z32
Delivery time by Air : 10-14 days
Category : Air filters
Filter type: Dry special fiber (LM). Replacement type. OEM part number:AY120-NS022, 16546-30P00 Double structure reinforced with stainless steel. Compatible Vehicle / MY / Model / Engine model JUKE 10/06- YF15 HR15DE JUKE 10/11- F15,NF15 MR16DDT JUKE NISMO 14/11- NF15 MR16DDT FairladyZ 89/07-00/08 Z32,CZ32,GZ32,GCZ32 VG30DE,VG30DETT * 2pc is required
Please input your Email address and password.
Model : ZN6, 6MT ealier and later model and 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
TUNERS KIT without Catalyzer B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: X ECU: X Boost Controller: X B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For Toyota 86, ZN6, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), Toyota 86 ZN6 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Japanparts No : 135-056-B1213-1
Model : GRJ120W and various models, See description
Delivery time by Air : 10-14 days
Category : Oil filters
Type: B-1213, Filter size: φ75xH85, Center bolt size: UNF3/4-16 (Vehicle) (Model Year) (Model) (Engine Model) (Stock part No.) ALPHARD MNH10W,MNH15W 1MZ-FE 90915-20003 SUPRA 93/05- JZA80 2JZ-GE,2JZ-GTE 90915-20003 HARRIER 97/12-03/02 MCU10W,MCU15W 1MZ-FE 90915-20003 HARRIER 03/02-06/01 MCU30W,MCU31W,MCU35W,MCU36W 1MZ-FE 90915-20003 HARRIER 16/09- ZSU60W,ZSU65W 3ZR-FAE 90915-20003 HARRIER HYBRID 05/03- MHU38W 3MZ-FE 90915-20003 MARK II 92/10-96/09 GX90,JZX90,JZX93 1G-FE,1JZ-GE,1JZ-GTE,2JZ-GE 90915-20003 MARK II 96/09-00/10 GX100,GX105,JZX100,JZX101,JZX105 1G-GE,1JZ-GE,1JZ-GTE,2JZ-GE 90915-20003 MARK II 00/10- GX110,GX115,JZX110,JZX115 1G-FE,1JZ-FSE,1JZ-GE,1JZ-GTE, 90915-20003 MARK II BLIT 02/01- GX110W,GX115W,JZX110W,JZX115W 1G-FE,1JZ-GTE,1JZ-FSE 90915-20003 LAND CRUISER PRADO 08/08-09/09 GRJ120W 1GR-FE 90915-20004 BLITZ RACING OIL FILTER features: Durability performance higher than specified in the JIS standard impulse durability test. Specially designed to maximize the filtration performance of the filter itself. Increased the filter strength. Lineup for various vehicle types. There is a range of fitments including popular Toyota, Subaru, Mitsubishi, Nissan, Honda, Mazda and Lexus engines.
Please input your Email address and password.
Japanparts No : 135-056-B5232-2
Model : VAB, GPE
Delivery time by Air : 10-14 days
Category : Oil filters
Type: B-5232, Filter size: φ68xH65, Center bolt size: M20xP1.5 (Vehicle) (Model Year) (Model) (Engine Model) (Stock part No.) WRX STI 18/07- VAB EJ20 15208-AA100 XV HYBRID 13/06- GPE FB20+MA1 15208-AA100 BLITZ RACING OIL FILTER features: Durability performance higher than specified in the JIS standard impulse durability test. Specially designed to maximize the filtration performance of the filter itself. Increased the filter strength. Lineup for various vehicle types. There is a range of fitments including popular Toyota, Subaru, Mitsubishi, Nissan, Honda, Mazda and Lexus engines.
Please input your Email address and password.
Model : NCEC, LF-VE, MY 08/2005 - 05/2015
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 7.0 / 5.0 Free length F/R: 200 / 180 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -80 to -35 / -50 to -10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: 250mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required. Stabilizer link with the product F/R: x / x BRAIN connection: x For ROADSTER, NCEC, LF-VE engine, MY 08/2005 - 05/2015 Remarks: For RHT as well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Who we are
How to order


