JDM specialist Japanparts.com

For
Silvia S13 PS13
180SX RS13 RPS13
Remarks - Incompatible with the vehicle HICAS equipped.

CUSCO ADJUSTABLE TOE CONTROL ROD Features:
- Correcting rear toe angle due to vehicle height change
- Improves rear tire running resistance and prevents partial wear
- Able to change movement such as understeer or oversteer by adjusting the toe angle.

* Adjustment: Turnbuckle type that can be adjusted while installed, as it is
* Setting: Rear
* Able to adjust camber and toe direction in combination with Adjustable rear upper arm

For
Silvia S14 S15
Remarks - Incompatible with the vehicle HICAS equipped.

CUSCO ADJUSTABLE TOE CONTROL ROD Features:
- Correcting rear toe angle due to vehicle height change
- Improves rear tire running resistance and prevents partial wear
- Able to change movement such as understeer or oversteer by adjusting the toe angle.

* Adjustment: Turnbuckle type that can be adjusted while installed, as it is
* Setting: Rear
* Able to adjust camber and toe direction in combination with Adjustable rear upper arm

For Fairlady Z Z33

CUSCO ADJUSTABLE TOE CONTROL ROD Features:
- Correcting rear toe angle due to vehicle height change
- Improves rear tire running resistance and prevents partial wear
- Able to change movement such as understeer or oversteer by adjusting the toe angle.

* Adjustment: Turnbuckle type that can be adjusted while installed, as it is
* Setting: Rear
* Able to adjust camber and toe direction in combination with Adjustable rear upper arm

For Fairlady Z Z34

CUSCO ADJUSTABLE TOE CONTROL ROD Features:
- Correcting rear toe angle due to vehicle height change
- Improves rear tire running resistance and prevents partial wear
- Able to change movement such as understeer or oversteer by adjusting the toe angle.

* Adjustment: Turnbuckle type that can be adjusted while installed, as it is
* Setting: Rear
* Able to adjust camber and toe direction in combination with Adjustable rear upper arm

A set of rear left and right.
Easy bolt-on installation. Replacing stock OEM links.
For 86, ZN6, MY 43/2012 -, Drive System FR, Adjustment Range: 73 - 87mm

Remarks: OEM stabilizer link length: 95mm (Between bolt shafts)
This product is designed for use in lower height vehicles. There is a possibility that the stabilizer link length may be not enough at the genuine height.
Greater effect can be obtained when used in combination with the CUSCO stabilizer.

CUSCO ADJUSTABLE PILLOW STABILIZER LINK REAR Features:
A stabilizer link with pillow ball that brings out the effects of the rear stabilizer.
A more responsive stabilizer effect can be obtained by making the connecting part with the suspension arm into a pillow ball and making the connecting part with the stabilizer into a pole joint, working the stabilizer directly.
Replacement with stock stabilizer link
By a pillow color holder structure, the rigidity of the mounting part is improved and the loosening prevention effect is also improved.
Stabilizer side: Ball joint, Arm side: pillow ball, Link length adjustable

A set of rear left and right.
Easy bolt-on installation. Replacing stock OEM links.
For Mark X, GRX120 121, MY 11/2004 - 10/2009, Drive System FR, GRX130 133, MY 10/2009 -, Drive System FR
Adjustment Range: 73 - 87mm

Remarks: OEM stabilizer link length: 105mm (Between bolt shafts)
This product is designed for use in lower height vehicles. There is a possibility that the stabilizer link length may be not enough at the genuine height.
Greater effect can be obtained when used in combination with the CUSCO stabilizer.

CUSCO ADJUSTABLE PILLOW STABILIZER LINK REAR Features:
A stabilizer link with pillow ball that brings out the effects of the rear stabilizer.
A more responsive stabilizer effect can be obtained by making the connecting part with the suspension arm into a pillow ball and making the connecting part with the stabilizer into a pole joint, working the stabilizer directly.
Replacement with stock stabilizer link
By a pillow color holder structure, the rigidity of the mounting part is improved and the loosening prevention effect is also improved.
Stabilizer side: Ball joint, Arm side: pillow ball, Link length adjustable

A set of rear left and right.
Easy bolt-on installation. Replacing stock OEM links.
For IS 250 IS250C, GSE20, MY 09/2005 - 08/2013, Drive System FR
For IS 350 IS350C, GSE21, MY 09/2005 - 08/2013, Drive System FR
For IS F, USE20, MY 12/2007 - 05/2014, Drive System FR
Adjustment Range: 73 - 87mm

Remarks: OEM stabilizer link length: 105mm (Between bolt shafts)
This product is designed for use in lower height vehicles. There is a possibility that the stabilizer link length may be not enough at the genuine height.
Greater effect can be obtained when used in combination with the CUSCO stabilizer.

CUSCO ADJUSTABLE PILLOW STABILIZER LINK REAR Features:
A stabilizer link with pillow ball that brings out the effects of the rear stabilizer.
A more responsive stabilizer effect can be obtained by making the connecting part with the suspension arm into a pillow ball and making the connecting part with the stabilizer into a pole joint, working the stabilizer directly.
Replacement with stock stabilizer link
By a pillow color holder structure, the rigidity of the mounting part is improved and the loosening prevention effect is also improved.
Stabilizer side: Ball joint, Arm side: pillow ball, Link length adjustable

A set of rear left and right.
Easy bolt-on installation. Replacing stock OEM links.
For BRZ, ZC6, MY 03/2012 - , Drive System FR
For WRX STI, VAB, MY 08/2014 - , Drive System 4WD
For WRX S4, VAG, MY 08/2014 - , Drive System 4WD
For Outback BS#, MY 10/2014 - , Drive System 4WD *
For Impreza WRX STI, GRB GRF, MY10/2007 - 08/2014, Drive System 4WD
For Impreza WRX STI, GVB GVF, MY07/2010 - 08/2014, Drive System 4WD
For Impreza, GH#, MY06/2007 - 12/2011, Drive System 4WD/FF *
For Impreza Sport, GP#, MY12/2011 - , Drive System 4WD/FF *
For Impreza G4, GJ#, MY12/2011 - , Drive System 4WD/FF *
For EXIGA, YA#, MY06/2008 - 03/2015, Drive System 4WD/FF *
For FORESTER, SH#, MY12/2007 - 11/2012, Drive System 4WD *
For FORESTER, SJ#, MY11/2012 - 07/2018, Drive System 4WD *
For Levorg, VM#, MY06/2014 - , Drive System 4WD/FF
For Legacy B4, BM# BN#, MY05/2009 - , Drive System 4WD *
For Legacy Touring Wagon, BR#, MY05/2009 - 10/2014, Drive System 4WD *
* Remarks - * Cannot be used on vehicles (types) that do not have a genuine OEM rear stabilizer.

This product is designed for use in lower height vehicles. There is a possibility that the stabilizer link length may be not enough at the genuine height.
Greater effect can be obtained when used in combination with the CUSCO stabilizer.

CUSCO ADJUSTABLE PILLOW STABILIZER LINK REAR Features:
A stabilizer link with pillow ball that brings out the effects of the rear stabilizer.
A more responsive stabilizer effect can be obtained by making the connecting part with the suspension arm into a pillow ball and making the connecting part with the stabilizer into a pole joint, working the stabilizer directly.
Replacement with stock stabilizer link
By a pillow color holder structure, the rigidity of the mounting part is improved and the loosening prevention effect is also improved.
Stabilizer side: Ball joint, Arm side: pillow ball, Link length adjustable

A set of rear left and right.
Easy bolt-on installation. Replacing stock OEM links.
For BRZ, ZC6, MY 03/2012 - , Drive System FR
For WRX STI, VAB, MY 08/2014 - , Drive System 4WD
For WRX S4, VAG, MY 08/2014 - , Drive System 4WD
For Outback BS#, MY 10/2014 - , Drive System 4WD *
For Impreza WRX STI, GRB GRF, MY10/2007 - 08/2014, Drive System 4WD
For Impreza WRX STI, GVB GVF, MY07/2010 - 08/2014, Drive System 4WD
For Impreza, GH#, MY06/2007 - 12/2011, Drive System 4WD/FF *
For Impreza Sport, GP#, MY12/2011 - , Drive System 4WD/FF *
For Impreza G4, GJ#, MY12/2011 - , Drive System 4WD/FF *
For EXIGA, YA#, MY06/2008 - 03/2015, Drive System 4WD/FF *
For FORESTER, SH#, MY12/2007 - 11/2012, Drive System 4WD *
For FORESTER, SJ#, MY11/2012 - 07/2018, Drive System 4WD *
For Levorg, VM#, MY06/2014 - , Drive System 4WD/FF
For Legacy B4, BM# BN#, MY05/2009 - , Drive System 4WD *
For Legacy Touring Wagon, BR#, MY05/2009 - 10/2014, Drive System 4WD *
* Remarks - * Cannot be used on vehicles (types) that do not have a genuine OEM rear stabilizer.

This product is designed for use in lower height vehicles. There is a possibility that the stabilizer link length may be not enough at the genuine height.
Greater effect can be obtained when used in combination with the CUSCO stabilizer.

CUSCO ADJUSTABLE PILLOW STABILIZER LINK REAR Features:
A stabilizer link with pillow ball that brings out the effects of the rear stabilizer.
A more responsive stabilizer effect can be obtained by making the connecting part with the suspension arm into a pillow ball and making the connecting part with the stabilizer into a pole joint, working the stabilizer directly.
Replacement with stock stabilizer link
By a pillow color holder structure, the rigidity of the mounting part is improved and the loosening prevention effect is also improved.
Stabilizer side: Ball joint, Arm side: pillow ball, Link length adjustable

Normal W-wish bone cannot adjust at all so, if the height of a car is lowered, a camber angle would become negative. This part is adjustable and using for pillow balls so that a motion of a suspension is made more direct. Adjustable angle is between -2 to +2.