For NOTE E12KAI(NISMO S) HE12(e-POWER e-POWER NISMO) E12, For March K13KAI(NISMO S) K13
Remarks - NISMO S
CUSCO Sway Bar/Rear additional Sway Bar Features:
The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations. The Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.
For NOTE E12KAI(NISMO S) HE12(e-POWER e-POWER NISMO) E12, For March K13KAI(NISMO S)
CUSCO Sway Bar/Rear additional Sway Bar Features:
The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations. The Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.
Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 14.0 / 8.0
Free length F/R: 200 / 260
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -33 to +10 / -48 to +10
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: 100mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required.
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For GT-R, R35, VR38DETT engine, MY 11/2010-
Remarks: NISMO ver. unconfirmed
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, Click here to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Contents:
Nissan CPS interview
Street impression MY20 & NISMO 50th anniversary model
High sensitivity tuned TEST at Fuji speedway
Get the position of the strongest GT-R
GT-R VS Porsche
Latest tuning information from shops
GR6 maintenance and repair
R35GT-R Maintenance File
JAPANESE TEXT ONLY. GRAPHICS INTENSIVE approx. 180-260 + pages per Issue. Contemporary overview of the Japanese domestic Aftermarket and Speed Equipment Industry covering specific vehicles and models. There is a possibility some items listed are no longer available.
Kit includes:
- ´17 model OEM shock absorbers (*1)
- ´17 model OEM damping force control module (*1)
- ´17 model OEM springs (*1)
- NISMO upper link set
- NISMO stabilizer kit
- Exclusive plate
- ´11 model OEM lower link
Note: *1 For Pure edition, Black edition, Premium edition
Remarks - 2x Rear stabilizer bush (Nissan OEM 54613-62B0B) are required for installation.
NISMO 2017 SUSPENSION VERSION UP KIT features:
This is a kit combines both of driving performance on the cirtuit and2017 Nissan GT-R OEM suspension which has received high acclaim for street use.
By combining Nismo´s stabilizer(*) and the upper link with the ´17 model suspension, a good balance has been achieved. This a kit for those who seeking a better ride in street use, and enjoy circuit driving. The shock absorber setup switch can also be used continuously.
(*) Recommended equivalent to 165% (rear) at simultaneous installation.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Kit includes:
- ´17 model OEM shock absorbers (*1)
- ´17 model OEM damping force control module (*1)
- ´17 model OEM springs (*1)
- NISMO upper link set
- NISMO stabilizer kit
- Exclusive plate
Note: *1 For Pure edition, Black edition, Premium edition
Remarks - 2x Rear stabilizer bush (Nissan OEM 54613-62B0B) are required for installation.
NISMO 2017 SUSPENSION VERSION UP KIT features:
This is a kit combines both of driving performance on the cirtuit and2017 Nissan GT-R OEM suspension which has received high acclaim for street use.
By combining Nismo´s stabilizer(*) and the upper link with the ´17 model suspension, a good balance has been achieved. This a kit for those who seeking a better ride in street use, and enjoy circuit driving. The shock absorber setup switch can also be used continuously.
(*) Recommended equivalent to 165% (rear) at simultaneous installation.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Spec:
Oval Shaft design.
Lightweight aluminum made and high rigidity shaft. Steel made mount brackets in blue.
Section shape type: 1 (Refer to an image)
Compatible NISMO as well.
Cusco Strut bar features:
Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads.
Spec:
Oval Shaft design.
Lightweight aluminum made and high rigidity shaft. Steel made mount brackets in blue.
Section shape type: 1 (Refer to an image)
Remarks - For NOTE e-POWER and e-POWER NISMO.
Cusco Strut bar features:
Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads.
Spec:
Oval Shaft design.
Lightweight aluminum made and high rigidity shaft. Steel made mount brackets in blue.
Section shape type: 1 (Refer to an image)
Remarks - Compatible with E12 KAI NISMO S. For E12, Confirmed X DIG-S grade only.
Cusco Strut bar features:
Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads.
0 Item
Please reload your browser if the view type does not change.
