Model : AGH30W and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
ALPHARD 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 *
ALPHARD 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
ALPHARD 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 *
VELLFIRE 2WD / 01.2015-01.2018 / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 2WD / 01.2015-01.2018 / GGH30W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 *
VELLFIRE 2WD / 01.2018- / AGH30W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 *
VELLFIRE 2WD / 01.2018- / GGH30W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -40 *
Remarks:
Please install using the included spring.
OEM stock wheel cannot be installed.
Can be installed on side lift up seats
Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required.
* The camber adjustable range is the measured value when the camber is adjusted only with this product.
* The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed.
* MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
UV cut clear coating finish. With stainless AUTO EXE logo.
Remarks:
- Cannot be installed on MAZDA2 with 360° view monitor equipped.
- A part of this product may be reflected in monitor screen of a front camera.
Spec:
For competition, circuit only. Street use prohibited in Japan.
Material: All stainless
Pipe diameter: φ80
Silencer diameter: φ130
Tail diameter: φ90
Position: S (Left side)
Consist of: 2
Weight: 7.0kg
For Impreza, GDB E/F/G, 2.0_Turbo EJ20 engine, 4WD, Grade WRX STI, 6MT, MY 06/2004-06/2007, Close Sound Level: 106dB, Idling Sound Level: 83dB
Inner silencer (ZIS011) is available as option part.
Remarks - Working with rear under is required for applied F and G.
KAKIMOTO RACINGGT1.0Z Racing Features:
GT1.0ZRacing is the world´s strongest ultra-lightweight and ultra-high performance racing muffler developed based on the concept of "Faster in 0.1 seconds!"
The exhaust efficiency that maximizes the performance of a full-tuned engine with a focus on high rev and circuit driving.
Full straight structure completely without sub silencer for the turbo car. (For NA, a sub-silencer with a slight throttle is added to secure torque)
Because of exhaust efficiency, the sound is little loud, but the clear sound quality that makes you feel like this is the "Kakimoto Sound" that makes the racing spirit heat up.
For weight reduction, main pipe of 1.0mm thickness, lightweight flange, hollow stay, etc are used in.
KAKIMOTO RACING Regu.06 & R features:
- While meeting JASMA standards, it does not sacrifice performance. A tuning muffler that follows the racing spirit of Kakimoto Kai.
- Focuses street use, it maximizes performance, such as Medium / low speed torque, power-up in all range, quick response.
- Comfortable sound for enjoying exhaust tune, 92dB (without inner silencer) as standard.
- Titanium burnt special coating tail (patented), full Tig welding, high quality with full stainless steel. Inner silencer is available.
0 Item
Please reload your browser if the view type does not change.
