JDM specialist Japanparts.com

φ90. All staineless. For EXIGA, YA4, 2.0_NA EJ20 engine, FF, Grade 2.0i, CVT/4AT, MY 06/2008-12/2012, Remarks- 2pc are needed, - Unconfirmed with the vehicle equipped OEM optional aero parts. For Forester, SJ5, 2.0_NA FB20 engine, 4WD, 2.0i -S, 6MT/CVT, MY 11/2012-07/2018, Remarks- Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. For Forester, SH5, 2.0_Turbo EJ20 engine, 4WD, 2.0XT, 4AT/5MT, MY 12/2007-11/2012, Remarks- 2pc are needed, - Unconfirmed with the vehicle equipped OEM optional aero parts. For Forester, SH5, 2.0_NA EJ20 engine, 4WD, 2.0X 2.0XS, 4AT/5MT, MY 12/2007-10/2010, Remarks- 2pc are needed, - Unconfirmed with the vehicle equipped OEM optional aero parts. For Legacy B4, BMM, 2.5_NA FB25 engine, 4WD, Grade 2.5i, CVT, MY 05/2012-10/2014, Remarks- Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. For Legacy B4, BM9, 2.5_Turbo EJ25 engine, 4WD, Grade 2.5GT, 5AT, MY 05/2009-05/2013, Remarks- 2pc are needed, Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. - Incompatible with tS. For Legacy B4, BM9, 2.5_Turbo EJ25 engine, 4WD, Grade 2.5GT, 6MT, MY 05/2009-03/2010, Remarks- 2pc are needed, Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. - Incompatible with tS. For Legacy B4, BM9, 2.5_NA EJ25 engine, 4WD, Grade 2.5i, CVT, MY 05/2009-05/2012, Remarks- Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. For Legacy Touring Wagon, BRM, 2.5_NA FB25 engine, 4WD, Grade 2.5i, CVT, MY 05/2012-10/2014, Remarks- Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. For Legacy Touring Wagon, BR9, 2.5_Turbo EJ25 engine, 4WD, Grade 2.5GT, 5AT/6MT, MY 05/2009-05/2013, Remarks- 2pc are needed, Unconfirmed with the vehicle equipped OEM optional rear bumper skirt. - Incompatible with tS. For Legacy Touring Wagon, BR9, 2.5_NA EJ25 engine, 4WD, Grade 2.5i, CVT, MY 05/2009-05/2012, Remarks- Unconfirmed with the vehicle equipped OEM optional rear bumper skirt.

Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ355 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. ALPHARD 2008/05-2015/01 ANH20W,ANH25W 2AZ-FE ALPHARD 2008/05-2015/01 GGH20W,GGH25W 2GR-FE ALPHARD 2015/01- AGH30W,AGH35W 2AR-FE ALPHARD 2015/01- GGH30W,GGH35W 2GR-FE ALPHARD G´s 2012/11-15/01 ANH20W 2AZ-FE ALPHARD G´s 2012/11-15/01 GGH20W 2GR-FE ALPHARD HYBRID 2011/11-15/01 ATH20W 2AZ-FXE ALPHARD HYBRID 2015/01- AYH30W 2AR-FXE VELLFIRE 2008/05-15/01 ANH20W,ANH25W 2AZ-FE VELLFIRE 2008/05-15/01 GGH20W,GGH25W 2GR-FE VELLFIRE 2015/01- AGH30W,AGH35W 2AR-FE VELLFIRE 2015/01- GGH30W,GGH35W 2GR-FE VELLFIRE G´s 2012/11-15/01 ANH20W 2AZ-FE VELLFIRE G´s 2012/11-15/01 GGH20W 2GR-FE VELLFIRE HYBRID 2011/11-15/01 ATH20W 2AZ-FXE VELLFIRE HYBRID 2015/01- AYH30W 2AR-FXE HARRIER 2013/12- ZSU60W,ZSU65W 3ZR-FAE HARRIER 2017/06- ASU60W,ASU65W 8AR-FTS HARRIER G´s 2015/01- ZSU60W,ZSU65W 3ZR-FAE HARRIER HYBRID 2014/01- AVU65W 2AR-FXE Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For BRZ Model ZC6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

NUR-SPEC CUSTOM EDITION option part. Tail Diameter: φ114.3 Insertion diameter: φ62 Tip Material: Titunium color

Only for EJ20 (As for BP/BL Legacy, engine cover need some modification to install). Boost pressure (accelerator off time) goes back to suction as stock. Material: Aluminum die casting

FRP unpainted. 3-piece structure on each side.

FRP unpainted. To be mounted onto OEM bumper.