700 x 304 x 103. Replace with original one. OEM recirculation return pipe can NOT use with this. For BNR32 and BCNR33, OEM foglamps can NOT use this this either. Shown picture is an image.
Aluminum. In-pipe x2, Out-pipe x2. *Choose type. *EVO.8 MR also required: 281-142-017. Turbine-Intercooler, Intercooler-Surge tank. Increase the efficiency and performance over the factory intercooler pipe system. Higher boost pressure plus improved response are typical gains from installing an HKS intercooler pipe upgrade kit. Silicone hoses, stainless steel clamps and other hardware are included.
Parts number:
13002-AM002 Evo.9
13002-AM001 Evo.8 buff finish
13002-SM005 Evo.7 buff finish
Size: 60φ
CONCEPT and FEATURES:
HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter.
Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit.
Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased.
Note:
It is necessary to lift the engine for pipe replacement.
Kit includes: joint pipe, gasket, bolts and nuts required for installation.
Size: 60φ
CONCEPT and FEATURES:
HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter.
Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit.
Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased.
Note:
It is necessary to lift the engine for pipe replacement.
Kit includes: joint pipe, gasket, bolts and nuts required for installation.
With stock oil pan layout, it is possible to have performance and exhaust sound of equal length exhaust manifold. Exhaust sound will be changed to be comfortable during shift down with automatic transmission. Throttle response will be improved. Weight: 5.2kg (OEM: 9.5kg). For EJ25 (2.5L).
For Vspec.
Pipe dia.: Main 60.5x2,Bypass 38x2
This product can be used with an HKS GT Sports Turbine KIT or stock turbine.This kit cannot be used with HKS GTIII sports turbine kit.
For SKYLINE GT-R Vspec, BNR34, Engine RB26DETT, MY01/1999 - 08/2002
Features:
A stock extension is designed to merge the main port (turbine exhaust) and bypass port (wastegate actuator) in turbine exhaust housing. This causes the exhaust stream from the main port to interfere with the bypass port stream when the actuator is opened. The primary and secondary exhaust pressure will rise causing the boost pressure to drop, which can cause a loss in power.
The HKS Extension Kit will optimize the turbines performance with minimal power loss.
The HKS Extension Kit utilizes an individual main port (turbine exhaust) and bypass port (wastegate actuator) to reduce the exhaust gas interference and provide a smoother exhaust flow. This will also reduce backpressure and improve the boost response throughout the RPM range. Even with the stock turbine, the exhaust gas merges in the exhaust housing. This exhaust gas interference can be prevented by a divider in the exhaust flange. The pipes connect towards the lower part of the extension housing where the exhaust gas pressure is lower. The main pipe's diameter is enlarged at the turbine outlet so the swirl flow caused by exhaust gas interference can be reduced. This will also prevent the secondary exhaust pressure from rising, and stabilize the boost pressure to increase the engine output. The flange is made with a high structural steel material, and the piping is made with a high heat resistant and durable Stainless (SUS304). These components will also improve the engine compartment appearance.
Note: This product can be used with an HKS GT Sports Turbine KIT or stock turbine.
0 Item
Please reload your browser if the view type does not change.
