JDM specialist Japanparts.com

Electrode: Center-Iridium / External-Platinum Plug type: BC-E (JIS) Heat rating: Choose 8 One-unit pack, with resistor Spec: -Electrode material・・・・platinum tip, iridium -Electrode diameter ・・φ0.55~φ0.8 (improved ignition performance, decreased electric d ischarged voltage) -A redesign of the ignition section tip has provided improved anti-smoldering or fouling characteristics. Features: NGK spark plugs are used in many different racing formats, including N1 racing. This is a highly reliable spark plug that features better ignition performance and reduced electric discharge voltages. Please check the 3rd picture for dimensions. Other pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase. Note on selection of heat values: Plugs with high heat ranges do not indicate higher speeds. Depending on the type of racing, the use of a too-high heat range may result in the plug not firing correctly, resulting in reduced RPM; use of too low a heat range can result in burning, causing poor high-rotational pickup. Be sure to select the plug that meets the type of racing and the engine.

Spec: Material: FRP, Black Gel Coating. Air cleaner duct available for Skyline GT-R (BNR34) Genuine air cleaner box Features: Reduces compressor intake pressure by 30% at the moment of boost pressure, also decreases air-path pressure. Easy installation: same as genuine NISSAN air cleaner (installation time 0.1 hours). Can be attached without modification when used with NISMO R-tune carbon hood, genuine aluminum hood, genuine carbon hood for V•spec, NISMO air inlet pipe or genuine inlet pipe. * No performance guarantee can be made if these parts are used with the engine hood or air inlet pipes of other manufactures.

Pair. With "NISMO" logo. Material: Dry carbon sheet + UV cut clear coat finish. Stick on Center Pillar Finisher

Pair. With "NISMO" logo. Material: Real caron. Stick on Center Pillar Finisher

Price is Pair. K=39.0N/mm. Lowers the vehicles approx.15mm(0.6). Painted in Cherry red. With Sti logo. For Applied-D/E B4/TW 2.0GTspec.B(MT/AT), Applied-D/E B4/TW 2.0GT(MT), Applied-C B4/TW 2.0GTspec.B,tuned by STI BLITZEN2006(AT), Applied-C TW 2.0GTspec.B,tuned by STI BLITZEN2006(MT), Applied-C B4/TW 2.0GT,WR-LTD2005(MT), Applied-A,B B4/TW 2.0GTspecB(AT), Applied-A,B TW 2.0GTspecB(MT), Applied-A,B B4/TW 2.0GT BLITZEN(MT)

Pair. Unpainted

Material: FRP, White Gel Coating (Unpainted), With Net (Already installed) and Door Under Panel

Unpainted. Without under cover.

Mount bush assy Qty per car: 1 Features: By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved accelerator response, shift feeling and cornering performance. Spec: Same shape, bolt-on type as standard part. Warning: -Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior. -Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount. -Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters. Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.

Material: FRP, White Gel Coating (Unpainted), Half Type (RH & LH Separate)