Model : PS13 / S14(J´s/Q´s), PS13/ RPS13, K11, K12, K13
Delivery time by Air : 14-21 days
Category : Wheels
M12xP1.25 16pc
Base diameter: 20mm, Bearing surface: 60° taper, Weight: (with aluminum cap )approx. 27g each
Exclusive adapter and hexagon wrench included.
For Silvia PS13 / S14(J´s/Q´s), 180SX PS13/ RPS13, March K11, K12, K13
P.N. Red 684516-0020R, Black 684516-0020BK, Gray 684516-0020GM
Note:
- You can not attach a wheel whose bearing surface is a flat seat or spherical seat.
- If the contact surface of the wheel nut is not tapered (such as genuine wheel etc.) it can not be mounted.
- It does not fit to the wheel bolt specification car.
- When the cap is attached, the effective screw length of this product is 20 mm. In advance, make sure that there is no shortage of thread allowance and bottoming of the vehicle hub bolt.
- Make sure that the nut fits inside the fender line.
- Even if the nut fits inside the fender, if it protrudes from the outermost part of the wheel rim, it may be pointed out.(such as a sharp projection).
- If the wheel offset spacer is not used in combination with the long hub bolt mounting vehicle, the caps can not be attached because the hub bolt is bottomed.
monster SPORT HEPTAGONAL WHEEL NUT Type2 Features:
- Theft prevention function
By using the heptagonal design, it has an anti-theft function.
- Light weight & high strength
The material used is chromium vanadium steel, which does not easily loosen even at high temperatures, for both of strength and small size weight reduction.
- Dedicated aluminum cap
Equipped with a colored anodized aluminum cut-out cap on the tip, it can also be removed. Giving nice accent to the wheel.
- Compact size
The total length of the wheel nut has been reduced to 28 mm (compared to the conventional heptagon wheel nut -4mm).It is also recommended for vehicles with protrusion tight clearances, such as compact cars and small cars.
- Brand logo
The logo of "MONSTER SPORT" was printed on each of the aluminum cap and nut body.
By about 2% increasing the size, the W / P speed is reduced. It takes measure of cavitation at high speeds and suppresses the rise in water temperature.
Furthermore, the high rib avoid the belt falling off in the over rev.
And weight reduction of 45%. (OEM: 286g / LEG MOTOR Original: 159g)
Features:
LEG MOTOR SPORTS cooling part controls only the oil temperature you care about without changing the water temperarture.
By mounting on the bumper forcement, you can not see the core in front of the radiator!
Tip Piece: 4
Position: LS & RS
Design: Circle, Inner curl
Tip Material: Stainless
Tip O.D.: 101.6-2.5R
Pipe Size: 60-60×4
Consist of: 2
Close Sound Level (OEM/BLITZ): 82 / 94
For 86, ZN6, FA20 engine, MY 04/2012 -
Remarks: For vehicles equipped TRD rear bumper spoiler/TRD rear garnish, For the model before M/C and after M/C , For MT , Meets new Japanese regulation
NUR-SPEC VS Features:
- The polished sus304 tail produces an elegant rear view
- Reasonable price
- For some models, "Quad Model", 4 tails in the left and right is also available.
- 2.5 R Curl Tail design meets new exterior technology standards
0 Item
Please reload your browser if the view type does not change.
