Shaft: φ32mm titanium pipe
Bracket: titanium
Weight: 0.9kg
Installation: Bolt on.
For CIVIC TYPE-R, Model: FK8, MY 09. 2017 - / CIVIC HATCHBACK Model: FK7, MY 09. 2017 -
Features: It controls distortion of rear fixed bolt and control movement of rear member.
Spec:
Mount F/R: Adjustable pillow / Reinforced rubber
Rate F/R(kgf/mm): 7.0 / 6.0
Free length F/R: 200 / 200
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -60 to 0 / -40 to +15
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: x
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For WRX STI, VAF, EJ25 engine, MY -
Remarks: US model, Customizing interior of rear shock absorber upper is required, Sound gets louder due to pillow upper mounts
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, <a href=https://www.blitz.co.jp/products/suspension/damper_zz-r.html target="new">Click here</a> to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Pipe size: Φ70
Remarks: Because of the structure to remove the second catalyst, it is not good for street use in Japan.
For 86, ZN6, FA20 engine, MY 04/2012 -
BLITZ EX. DIFFUSER features:
- Significant improvement in exhaust efficiency by removing the catalyst.
- Sharp supercharging response and power up with the exhaust efficiency improvement.
- All stainless steel with mirror finish with high durability.
- In addition to the NUR - SPEC series, it can also be attached to a normal muffler
Pipe size: Φ70
Remarks: Because of the structure to remove the second catalyst, it is not good for street use in Japan.
For BRZ, ZC6, FA20 engine, MY 03/2012 -
BLITZ EX. DIFFUSER features:
- Significant improvement in exhaust efficiency by removing the catalyst.
- Sharp supercharging response and power up with the exhaust efficiency improvement.
- All stainless steel with mirror finish with high durability.
- In addition to the NUR - SPEC series, it can also be attached to a normal muffler
Spec:
Attachment height: 28mm
For φ65 and φ70
(Vehicle) (Model Year) (Model) (Engine Model) (Center bolt) (O-ring size)
COPEN XPLAY 14/11- LA400K KF-VET 3/4-16 φ65
COPEN CERO 15/06- LA400K KF-VET 3/4-16 φ65
COPEN ROBE 14/06- LA400K KF-VET 3/4-16 φ65
BLITZ OIL SENSOR ATTACHMENT features
- This attachment is used when sandwiching TEMP sensor and PRESS sensor to oil filter.
- Center bolt is included with both 3 / 4-16 and M20-P1.5 for Type D, M20-P1.5 only for Type H.
- O-ring is compatible with both φ65 and φ70 sizes for Type D, φ65 size only for Type H.
- 1/8 PT holes in the sensor mounting part. 3 places.
- Type H is a type that gives the attachment a height. Sensors can also be attached to oil filters such as TOYOTA 86 and some SUBARU vehicles and HONDA S660.
- Two 1/8 PT sunk head plug are included.
- With "BLITZ" logo.
0 Item
Please reload your browser if the view type does not change.
