M12xP1.5 16pc
Base diameter: 20mm, Bearing surface: 60° taper, Weight: (with aluminum cap )approx. 27g each
Exclusive adapter and hexagon wrench included.
For Demio DW3W / DW5W / DE3FS / DE3AS / DE5FS, Roadster NA6CE / NA8C / NB6C / NB8C / ND5RC / NDERC
P.N. Red ZZTN52-16R, Black ZZTN52-16BK
Note:
- You can not attach a wheel whose bearing surface is a flat seat or spherical seat.
- If the contact surface of the wheel nut is not tapered (such as genuine wheel etc.) it can not be mounted.
- It does not fit to the wheel bolt specification car.
- When the cap is attached, the effective screw length of this product is 20 mm. In advance, make sure that there is no shortage of thread allowance and bottoming of the vehicle hub bolt.
- Make sure that the nut fits inside the fender line.
- Even if the nut fits inside the fender, if it protrudes from the outermost part of the wheel rim, it may be pointed out.(such as a sharp projection).
- If the wheel offset spacer is not used in combination with the long hub bolt mounting vehicle, the caps can not be attached because the hub bolt is bottomed.
monster SPORT HEPTAGONAL WHEEL NUT Type2 Features:
- Theft prevention function
By using the heptagonal design, it has an anti-theft function.
- Light weight & high strength
The material used is chromium vanadium steel, which does not easily loosen even at high temperatures, for both of strength and small size weight reduction.
- Dedicated aluminum cap
Equipped with a colored anodized aluminum cut-out cap on the tip, it can also be removed. Giving nice accent to the wheel.
- Compact size
The total length of the wheel nut has been reduced to 28 mm (compared to the conventional heptagon wheel nut -4mm).It is also recommended for vehicles with protrusion tight clearances, such as compact cars and small cars.
- Brand logo
The logo of "MONSTER SPORT" was printed on each of the aluminum cap and nut body.
Carbon intake duct is replaceing parts for original intake duct.This duct's inside is very smooth, intake air stream less resistance.
Parts number:
50130TR0000 VAB /GRB/ GH
50600DM0000 VAG /VM
*Only for SUBARU H4 N/A, H4 Turbo engine vehicles.
*Recommended usage period: 1 year.
This performance radiator cap has its valve pressure set at 127kPa, ensuring the cooling system's maximum performance.
By raising the coolant pressure, the coolant's boiling point is raised above that achieved with the stock cap.
This gives more headroom in the coolant system under extreme conditions before boiling, which severely hinders cooling ability.
The use of corrosion resistant stainless steel and heat resistant soft silicone for the inner passage seal improves sealing performance, resulting in both high durability and performance.
Featuring a pressure valve spring made to a tolerance of +/- 0.1kg/cm2, this is a replacement pressure cap with high precision and quality.
0 Item
Please reload your browser if the view type does not change.
