JDM specialist Japanparts.com

NISMO GT L.S.D. Pro is a professional model that can also help cut overhaul costs.


Clutch-type LSD with adjustable initial torque (6.5-8.5-14.0 kgf.m *1)

The GT L.S.D. Pro is the ideal solution for derivers who are spending too
much time working on their LSD. Otherwise identical to the standard GT
L.S.D., the GT L.S.D. Pro adds one unique feature: you will be able to
re-set your initial torque with just a turn of your socket wrench and
without disassembling your LSD. With a low, middle and high setting (6.5 -
8.5 - 14.0 kgf.m), easy adjustments can be made for changing driving
styles, tires, suspensions, tuning or track conditions. As initial torque
decreases with aging parts, changing the initial torque setting -LOW two
times, MIDDLE once- will save you money on overhaul costs.

*1 The design standard for initial torque output values is 6.5 - 8.5 - 14.0 kgf.m.
After the LSD is broken in and the plates are working well together, these
figures will stabilize at LOW: 5.0 to 5.5; MIDDLE: 7.0 to 7.5; HIGH 12.5 to 13.0
kgf.m. The GT L.S.D. Pro ships pre-set to the Middle setting.



GT L.S.D. Pro cam angles

Drive side/ Coast side: 55/1 (1.5WAY), 55/45(2WAY)



Recommended the initial torque;

Circuit driving: LOW

Street driving: LOW

Drift driving: MIDDLE



This kit includes following NISMO or Nissan OEM parts:

-Side flange x2

-Side bearing x2

-Oil seal x2

-Gasket x1

-Bolt x10 (use these bolts when the hole size of the ring gear bolt is M12)

-COMPETITION OIL type 2189E (75W140) 1L x2

-GT L.S.D.Pro sticker x2



For following models:

RPS13 - SR20DET engine, AT

S13 - SR20DET engine, AT

PS13 - SR20DET engine, AT

S14 - SR20DET engine, AT

CS14 - SR20DET engine, AT

S15 - SR20DET engine



Parts Number:

38420-RSS20-D5 2WAY

38420-RSS15-D5 1.5WAY

Pair. With "NISMO" logo.

Material: Dry carbon sheet + UV cut clear coat finish.

Stick on Center Pillar Finisher

Pair. With "NISMO" logo.

Material: Real caron.

Stick on Center Pillar Finisher

A set of left and right side.

No.9 part in the picture.

Shape and materials are the same as for standard parts.
NISMO reinforced Bush have been inserted.

Color: silver with NISMO sticker

effective length extended. Installation is possible in only HICAS-equipped vehicles. When car is to be used on public roads, an application for modification is required (in Japan; local laws may vary). Clearance of tires, fenders, etc. will change after installation.



Warning:

Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.

*Won't fit on LHD(Left Hand Drive), Only for RHD, R34 GT-R, 25GT-4(MT)

*Won't fit on LHD(Left Hand Drive), Only for RHD, R33 GT-R, GTS-4(MT)

*Won't fit on LHD(Left Hand Drive), Only for RHD, R32 GT-R, GTS-4(MT)

*Won't fit on LHD(Left Hand Drive), Only for RHD, Z33 (AT & MT)
Price is set of 2.

Only for RHD. Both Sedan & Coupe (before MY2004/11) with AT Power Seat. To install this to sedan, rear center mat and rear seat has a little bit of space but still possible to install.

Right side fixed.



Spec:

Same materials and design as standard part; bolt-on type.



Features:

A hardened mount bush for attaching the steering gear to the member (body). By increasing the hardness of the mount bush rubber, extra motion of the steering gear is restrained, so steering response is improved, with a more direct feel and more minute steering information transmitted to the driver.



Warning:

- Compared to standard steering, minute bumps in the road and other unevenness will be transferred to the steering wheel.

- Steering may feel more heavy than with standard steering parts.