For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
It changes I-S model automatically (it can use the model which has S# model but to S# doesn't go automatically). Please choose the model: (#Y090399006) Type 1 or (#Y090399007) Type 2.
For Type 1: GJ/GP Impreza Sport, GK/GT Impreza Sport, GP7 XV, GT7 XV, SJ5 2.0L NA Forester, SK9 Forester and VM4 Levorg.
For Type 2: VAG WRX S4, SJG 2.0L Forester turbo, VMG 2.0L Turbo and BN9/BS9 Legacy B4/Outback (as for BN9/BS9, Subaru select monito, OBD and so on setting using monitor is possible to use).
It does NOT fit onto XV Hybrid GPE, Impreza Sport Hybrid GPE and Forester Hybrid SKE at all.
Aluminum. Blue alumite or Red alumite. Size D is for up to 17.2cm in width (standard). Size B is for up to 13cm in width. The holder itself is 2cm in width. Caps may have to be cut a little on OEM battery. It comes with an optional YR-Advance logo sticker.
0 Item
Please reload your browser if the view type does not change.
