M12xP1.25 16pc
Base diameter: 20mm, Bearing surface: 60° taper, Weight: (with aluminum cap )approx. 27g each
Exclusive adapter and hexagon wrench included.
For HA24S / HA25S / HA35S / HA36S
P.N. Red 684516-0020R, Black 684516-0020BK, Gray 684516-0020GM
Note:
- You can not attach a wheel whose bearing surface is a flat seat or spherical seat.
- If the contact surface of the wheel nut is not tapered (such as genuine wheel etc.) it can not be mounted.
- It does not fit to the wheel bolt specification car.
- When the cap is attached, the effective screw length of this product is 20 mm. In advance, make sure that there is no shortage of thread allowance and bottoming of the vehicle hub bolt.
- Make sure that the nut fits inside the fender line.
- Even if the nut fits inside the fender, if it protrudes from the outermost part of the wheel rim, it may be pointed out.(such as a sharp projection).
- If the wheel offset spacer is not used in combination with the long hub bolt mounting vehicle, the caps can not be attached because the hub bolt is bottomed.
monster SPORT HEPTAGONAL WHEEL NUT Type2 Features:
- Theft prevention function
By using the heptagonal design, it has an anti-theft function.
- Light weight & high strength
The material used is chromium vanadium steel, which does not easily loosen even at high temperatures, for both of strength and small size weight reduction.
- Dedicated aluminum cap
Equipped with a colored anodized aluminum cut-out cap on the tip, it can also be removed. Giving nice accent to the wheel.
- Compact size
The total length of the wheel nut has been reduced to 28 mm (compared to the conventional heptagon wheel nut -4mm).It is also recommended for vehicles with protrusion tight clearances, such as compact cars and small cars.
- Brand logo
The logo of "MONSTER SPORT" was printed on each of the aluminum cap and nut body.
Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 8.0 / 6.0
Free length F/R: 200 / 160
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -100 to -5 / -50 to -10
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: 200mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required.
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For RX-8, SE3P, 13B-MSP engine, MY 04/2003 -
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, <a href=https://www.blitz.co.jp/products/suspension/damper_zz-r.html target="new">Click here</a> to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 7.0 / 5.0
Free length F/R: 200 / 180
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -80 to -35 / -50 to -10
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: 250mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required.
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For ROADSTER, NCEC, LF-VE engine, MY 08/2005 - 05/2015
Remarks: For RHT as well
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, <a href=https://www.blitz.co.jp/products/suspension/damper_zz-r.html target="new">Click here</a> to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Spec:
Mount F/R: Adjustable pillow / Reinforced rubber
Rate F/R(kgf/mm): 6.0 / 4.0
Free length F/R: 150 / 200
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -55 to 0 / -60 to -10
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: x
Stabilizer link with the product F/R: FF / x
BRAIN connection: x
For BRZ, ZC6, FA20 engine, MY 03/2012 -
Remarks: MC前後共通, リアショック上部トランクサイドパネル要カット加工, ピロアッパーマウントを採用しているためショック作動音が聞こえやすくなります
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, <a href=https://www.blitz.co.jp/products/suspension/damper_zz-r.html target="new">Click here</a> to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
0 Item
Please reload your browser if the view type does not change.
