JDM specialist Japanparts.com

A set of 2pc. With rubber boot.

A set of 2pc. With rubber boot.

2.0L. Comes with Stay x1, 15mm hose 2m, hose band x5 and plug

Comes with Hose band x2, joint x1, tie wrap x2

4 level adjustable. Adjustable range: 0 / +5mm / +10mm / +15mm, Material: steel For car race.

Please choose one based on the second image.

For WRX STI - VAB IMPREZA - GC8 GDA GDB GVB GVF GRB GRF EXIGA - YA4 YA5 FORESTER - SF5 SG5 SG9 SH5 SH9 SHJ SJ5 SJG SK9 LEVORG - VMG VM4 LEGACY - BD5 LEGACY B4 - BE5 BL5 LEGACY TOURING WAGON - BG5 BH5 BP5 XV - GT3 GT7 IMPREZA G4 - GK2 GK3 GK6 GK7 IMPREZA SPORT - GT2 GT3 GT6 GT7 Remarks - For XV, IMPREZA G4 and IMPREZA SPORT, the removal of the plastic pipe between the air cleaner and the throttle is required. Cusco PITCHING STOPPER features: Suppresses engine and transmission movement and improves response when accelerating and decelerating! An absolute must-have for sport driving! -The hardened rubber bushings prevent the engine and transmission from moving back and forth. -This improves response when accelerating and decelerating and suppresses behavioral confusion. It also improves shift feel. -Blue anodized aluminum body is machined from lightweight aluminum. -Bolt-on installation available.

Diameter: M12xP1.25 A set of 2pc Lod length / Adjustable range / Part number / Remarks 1.L=155mm  / 225mm-255mm / 00B 318 A22 / Front 2.L=195mm  / 265mm-295mm / 00B 318 A26 / Front 3.L=235mm  / 305mm-335mm / 00B 318 A30 / Front 4.L=275mm  / 345mm-375mm / 00B 318 A34 / Front   !! the max of 4. is 375mm. Compatible link length is up to +15mm compared with OEM.Please be careful in the case of a vehicle that has drastically lowered down. Remarks: Adjustable range and OEM length is from the center of ball joint bolt to the center. Note: Regarding reference compatibility, it is based on OEM sway bar link length. There is possiblity of exceeding the adjustment range and interference, etc. due to mounted parts (height controlled device, stabilizer, etc.). After installing and adjustment this product, be sure to check that there is no interference of each part. FEATURES OF CUSCO ADJUSTABLE SWAY BAR LINK: This part can adjust correct mounting angle of stabilizer when lowering height. High quality adjustable stabilizer link to exert original performance and effect. -Possible to adjust angle in a millimeter. -Bolt on type. Just replace OEM sway bar link.

SPEC: Blue painted high strength steel Bolt on installation Tighten with rear seat bracket and anchor bracket for child. Note: - Working of the interior is necessary to install. (seat bracket side cover + rear trunk foaming tray) - This product protrudes above the trunk floor surface. Please note that loading of loads may be affected, such as when defeating the seat back and using it flat. - When attaching to the revog, adjustment of the final third stage of the reclining mechanism of the rear seat becomes difficult due to the interference of the stay to the seat back. When using this product, please use it in the reclining up to the 2nd step. For Subaru WRX STI (VAB), 08.2014- / 4WD / 2.0L(Turbo) Subaru Levorg (VM4), 08.2014- / 4WD / 1.6L(Turbo) Subaru Levorg (VMG), 08.2014- / 4WD / 2.0L(Turbo) FEATURES - Improved the body rigidity of the rear section by tightly connecting the left and right rear side members. - More rear traction by reducing the twist of the body - Improve control of the vehicle - 4-point seat belt anchor for shoulder belt (*) *Notes - When using a 4-point seat belt it is necessary to defeat the rear seat back. - When using the anchor part of this product as a 4 point type (or more) as a seat belt attachment point, be sure to use it as a shoulder belt. Please do not use for the waist belt absolutely. (Power brace seat rail plus 6A1-492-SP is recommended for hip belts installation) - When using a 4 point type (or more) seat belt, please install according to the instruction manual of the seat belt to be used.