For ALPHARD, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For ALPHARD HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For VELLFIRE, AGH30W AGH35W GGH30W GGH35W, 2AR-FE 2GR-FE 2GR-FKS engine, MY 01/2015 -
For VELLFIRE HYBRID, AYH30W , 2AR-FXE engine, MY 01/2015 -
For both of Zenki and Koki (ealier model and later model)
BLITZ BRAKE HOLD JUMPER Features:
- BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake.
-The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt.
- Designed exclusively for vehicle types.
- Includes short parts for wiring connection.
- For the time the brake hold function is not required, you can return to normal control with simple operation.
NOTE:
- Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model.
- Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back)
- Do not overestimate the brake hold function and be careful to always operate the brake and handle.
- Wiring processing is required to connect the seat belt signal line.
Model : AXZH10 and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
LEXUS ES / 10.2018- / AXZH10 / A25A-FXS / -2° 30' - -1° 30'* / -80 - -19
LEXUS UX 2WD / 11.2018- / MZAA10 / M20A-FKS / -2° 30' - -1° 30'* / -100 - -40
LEXUS UX Hybrid 2WD / 11.2018- / MZAH10 / M20A-FXS / -2° 30' - -1° 30'* / -100 - -40
* The camber adjustable range is the measured value when the camber is adjusted only with this product.
* The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed.
* MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
Spec:
Type: 2-points
Shaft: Oval titanium pipe
Bracket: titanium, plate
Bolt Nut: titanium
Weight: 1.1kg
Installation: Bolt on.
Note:
* Cutting lining is required.
* Cutting cargo floor box is required.
For WRX STi, Model: VAB, MY 08.2014 - / WRX S4, Model: VAG, MY 08.2014 - / LEVORG 2.0 Turbo, Model: VMG, MY 06.2014 -
Features:
Even the most powerful car can not perform well at a high level without sufficient body rigidity. The Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.
FEATURES OF THE BLITZ SUS POWER AIR AIR CLEANER CORE-TYPE LM:
- Reasonable price core type cleaner kit.
- Filter color is Red. Blue and red 2 lineup. Excellent fashionability.
- Replaceable with dry special fiber.
- Combined with stainless steel realizes high durability and strength.
- Replacement filters are available in blue and red.
- Newly developed BLITZ´s original special two-layer fiber filter enhances high dust collection efficiency and suction efficiency.
- Compatible models More than 140 domestic models.
- Color variation- blue and red.,
0 Item
Please reload your browser if the view type does not change.
