FRP with gel coat finish. Requires painting. Choose the transmission. Consist of two pieces. Need to replace the ash tray, cigar socket and extending electronic lines. Only for the Toyota original seats.
Spec:
- Cold air type
- Core: H178xW171 xD76(mm), 9layers, Aluminum
- Air guide: Aluminum
Contents:
- Oil cooler core (with air guide and net)
- Stainless mesh hose (with #6 connector and heat-resistance tube)
- Inline filter
- Oil pump
- Harness & switch
- Attachment
Note:
-The "NISMO logo" included in the connector is for product identification, so it does not guarantee the quality in terms of appearance or process deterioration.
-The core is anodized to prevent corrosion. As a result, the core fin may appear to be dirty, but there is no problem with performance.
-During working of the pump, a loud noise is generated.
-The ground clearance of the mounting part drops about 100 mm.
-With the installation of the differential oil cooler kit, approximately 1.5 liters of differential oil is required. This product does not contain def oil.
-Do not use at temperatures below freezing because there is a possibility of abnormal rise of hydraulic pressure and melting of wiring fuse.
For Z34 PN.21600-RRZ46
NISMO Diff oil cooler kit FEATURS:
This is an item geared for those who enjoy continuous circuit driving in Fairlady Z (Z34) models.
In addition to using a core with superior heat exchanging capacity, air guides can now be set by using a layout optimized for each vehicle model, this kit both increases cooling through the introduction of air into the core and avoids heat damage from the muffler. In addition, a net is included to prevent damage to the core due to flying objects. Furthermore, a dedicated harness and switch allow for ON/OFF control of the oil pump in the cabin.
1pc.
Filler bolts that are lightweight by using a duralumin alloy.
Remarks - Incompatible with temperature sensor
Impreza GC/GF, Applied model A-G, MY 11.1992-8.2000, Turbo model
Impreza GD/GG, Applied model A-B, MY 09.2000-10.2002, Turbo model
Legacy BL5/BP5, Applied model A-E, MY 05.2003-, 5MT
Outback BP9, Applied model A-E, MY 05.2003-, 4AT
Legacy BLE/BPE, Applied model A-E, MY 05.2003-, 3.0R 6MT
Legacy BE/BH, Applied model A-D, MY 06.1998-04.2003, Turbo model
Legacy BD/BG, Applied model A-C, MY 10.1993-05.1998, Turbo model
Forester SG, Applied model A-F, MY 02.2002-, Turbo model
Forester SF, Applied model A-D, MY 021997-01.2002, all model
0 Item
Please reload your browser if the view type does not change.
