JDM specialist Japanparts.com

Contents: GTIII-RS Turbocharger Assy with an actuator. Oil & Water Piping Parts Air Cleaner, Suction Pipe Front-mounted Intercooler, Piping Exhaust Manifold, For 11001-AT005, Extension with CAT Insulator Cover, Insulator Sheet Gaskets, Brackets, Bolts, etc. For 86, ZN6, FA20 engine, 04/2012 - 07/2016 For MT, Extension with CAT. Compatibility with the late model is confirmed only with JDM model. <a href=https://www.hks-power.co.jp/en/product_db/turbo/db/20272 target="new">Click here to check the performance data in HKS page</a> Note: This kit can be used with HKS S-TYPE OIL COOLER KIT. * OIL COOLER KIT is NOT included in this kit. * This is an image of a prototype and may differ from the actual product. * Reinforced fuel parts such as injectors are required. * Pressure sensor is required separately. * Vehicle modification is required in order to install this kit * Engine management parts are not included in this kit. * Resetting is required. Features: HKS has released a long-waited Bolt-on Turbo Kit with GTIII-RS turbine for 86/BRZ. GTIII-RS turbine that is the best match with 2L engine, special designed turbo housing, and other special parts are made by HKS special turbo technology. This kit is available from a stock to tuned engine. The engine output will reach 450ps when this kit is installed to a tuned engine. * Another kit including the extension with CAT is additionally available.

Contents: Oil pan, Seal ring For 86, NZ6, FA20 engine, MY 12/2004 - Remarks: For BOLT ON TURBO HKS OIL PAN for Bolt On Turbo 86 features: - Oil Pan for easy setup with GTIII-RS turbine 86 (11001-AT005, 11001-KT001). Stock oil pan replacement is pre-fitted with oil return pipe, ready for installation of turbo. - Strong welding on inside and outside reinforces the structure and additional bracket is used to improve strength to avoid risk of leakage. - Parts were carefully painted to enhance safety in long-term usage.

Contents: - extension - heat shield plate - gasket bolt, nut, etc. Remarks: For use with GTIII-RS 86(11001-AT005). * Includes 3type of heat shield plate

Size: 60φ CONCEPT and FEATURES: HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter. Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit. Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased. Note: It is necessary to lift the engine for pipe replacement. Kit includes: joint pipe, gasket, bolts and nuts required for installation.

Size: 60φ CONCEPT and FEATURES: HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter. Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit. Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased. Note: It is necessary to lift the engine for pipe replacement. Kit includes: joint pipe, gasket, bolts and nuts required for installation.

Spec: Muffler Style: Super Turbo Muffler Style: Ti-1 (Titan) Material: S3 SUS304 High quality stainless Tip O.D.: 90×2 L&R Pipe Size: 74.7-60.5-54 x4 Consist of: 4 Close Sound Level: Stock 78 / HKS 85 Idling Sound Level: Stock 60 / HKS 67 Remarks: - Compatible with S207 - HKS logo on tails - Cmpatible with vehicle with STI rear side under spoiler or STI rear under spoiler. For WRX S4/ WRX STI, VAG/ VAB, EJ20(TURBO) engine, MY 08/2014 - <a href=http://www.hks-power.co.jp/en/product_db/muffler/db/21219 target="new">Click here to check HKS page for details</a> Features: "High-dimensional Super Turbo Muffler Debut" Exhaust Efficiency & Sound Pressure Reduction are implemented together. The turbo engine master HKS challenged to implement the following 3 characteristics together to develop Super Turbo Muffler. -Effective on stock to high performance vehicles w/ upgraded turbines. -The performance exhaust sound meets the JASMA standard. -Unique exhaust sound designed specifically for the engine.

Material: S304 stainless. Engine: L15B. Tail diameter: 87 OVAL x 2. Cannot be mounted on 4WD. Not compatible with OEM rear lower garnish or rear aero bumper. Can be mounted on grade RS if you use OEM rubber 18215-TF0-003.

<a href="https://origin.hks-power.co.jp/en/product_db/intake/db/21918" target="new"><img title="21918" src="http://capture.heartrails.com/200x100/shorten?https://origin.hks-power.co.jp/en/product_db/intake/db/21918" alt="https://origin.hks-power.co.jp/en/product_db/intake/db/21918" width="200" height="100" /></a>

Size: φ200-80/Red For Civic Type R, FK8, K20C engine, MY 09/2017 - <a href=https://www.hks-power.co.jp/en/product_db/intake/db/21157 target="_blank">Check HKS page for details</a> HKS RACING SUCTION features: - Improving the suction efficiency by changing the genuine flexible rubber hose to aluminum piping. In HKS flow bench test, the suction resistance has been reduced compared to stock intake system. - The exclusive heat insulator suppresses the influence of heat in the engine room. - It is possible to correct the deviation of the air flow meter output generated by the air cleaner itself by coupler on with the kit with AFR (Air Fuel ratio Regulator). (A kit without AFR requires separate setting with a fuel correction device etc.) - The sporty intake sound unique to bare type air cleaners is one of the features. * By using together with "cold air intake box", which will be released soon, exhibits superior performance.

Size: φ200-80/Red For Civic Type R, FK8, K20C engine, MY 09/2017 - <a href=https://www.hks-power.co.jp/en/product_db/intake/db/21158 target="_blank">Check HKS page for details</a> Note: This kit does not include AFR. Correcting fuel device is required. HKS RACING SUCTION features: - Improving the suction efficiency by changing the genuine flexible rubber hose to aluminum piping. In HKS flow bench test, the suction resistance has been reduced compared to stock intake system. - The exclusive heat insulator suppresses the influence of heat in the engine room. - It is possible to correct the deviation of the air flow meter output generated by the air cleaner itself by coupler on with the kit with AFR (Air Fuel ratio Regulator). (A kit without AFR requires separate setting with a fuel correction device etc.) - The sporty intake sound unique to bare type air cleaners is one of the features. * By using together with "cold air intake box", which will be released soon, exhibits superior performance.