The initial torque is set low for smooth entrance into turns when
cornering. The ideal number of slip surfaces and optimal cam angles
were adjusted to provide powerful front-drive power when distribution
moves to the front such as when exiting a corner using E-TS. Because
initial torque is low, the front LSD does not chatter.
Pressure ring cam angles: Drive side/ Coast side: 45(55)/1
Number of plates: 8 per side
Initial torque: 29.4Nm(3kgf.m)
Including Fitting Kit (Oil seal, O ring, 2x Bearing)
To install Front L.S.D., scraping transmission case slightly is required.
Model : RB20DE (T), RB25DE (T), RB26DETT vehicles with RB twin-cam engine
Delivery time by Air : 14-21 days
Category : Pulley & Belt
Features:
Core wires of tempered glass fiber, with the tooth fabric made of aramid fiber for immediate improvement in resistance to stretch, heat, cutting, tooth loss and abrasion. The result is greater endurance to the high heat, sudden change in rpm and torque that occurs with a tuning engine, so that maximum potential of the engine can be realized. Identical shape as genuine NISSAN part.
Comparison with genuine NISSAN timing belt:
Strength resistance 1.2 times greater; heat resistance 1.8 times; cut resistance 3 times; tooth loss and abrasion resistance 9 times.
Model : (R)S13, (R)PS13, S14, S15, RNN14 SR20DET, Z31 VG20ET/RB20DET
Delivery time by Air : 10-15 days
Category : Clutch release
For FS5W71C, FS6R92A
Chrome-molybdenum construction; flat washer included
Features
When a sports clutch cover or multi-plate clutch set are used, the stress on the release fork and the release pivot which acts as a fulcrum are also increased. In competitive driving and other high-load situations, there is greater danger that the release pivot might fail. This Reinforced Release Pivot is manufactured of high-quality chrome-molybdenum steel, providing a 30% increase in strength compared to a standard carbon steel pivot, thereby reducing the chance of failure due to overload. The use of a flat washer instead of standard spring washer also reduces the chance of the release pivot's coming loose due to excessive play.
Specification
30537-RS540:M10xP1.5,total length 41mm
Wing: 1390mm in width. Carbon with weather-resistant urethane paint. Type.L is compatible with GR Trunk Spoiler. Please select: LOW stay (81093), MID stay (81095) or MID type.L (81105).
Wing: 1390mm in width. Carbon with weather-resistant urethane paint. Type.L is compatible with GR Trunk Spoiler. Please select: LOW stay (81093), MID stay (81095) or MID type.L (81105).
0 Item
Please reload your browser if the view type does not change.
