This item needs to be mounted with SPORTS MUFFLER (MKF8Y70 or MKF8Y80). Material: AES. Color: black (no need to paint). Rear bumper has to be cut to install.
Painted in Piano Black and matte black. Only for the car without 360 degree view monitor. MKF2500 for the car with 360 degree view monitor has been discontinued.
ONLY for MY2021/11 and before.
A set of
Lower arm (front side) /front * image No.4a Hardness:118%
Lower arm (rear side) /front * image No.5 Hardness:127%
Lower arm (damper bottom) /front * image No.6 Hardness:125%
Lower arm (stop washer) /front * image No.4b Hardness:115%
Trailing link /rear image No.9 Hardness:140%
Toe control link /rear image No.10 Hardness:121%
Lateral link (RH) /rear image No.12 Hardness:129%
Lateral link (LH) /rear image No.12 Hardness:129%
Axle /rear * image No.14 Hardness:129%
Axle /rear * image No.15 Hardness:109%
Axle (toe control)/rear * image No.16 Hardness:136%
Axle /rear * image No.17 Hardness:107%
* Remarks- Press-fitting work of bush is necessary for installation.
AUTO EXE SUSPENSION BUSH SET - LOWER FEATURES:
By stiffening the bush on the suspension lower side, which mainly receives the load from the road surface, it suppresses alignment changes and supports accurate handling. By combining the upper side, which has a relatively low load, with mass-produced products, a ride that combines flexibility is created. I would recommend it as a basic set of suspension bush. Set includes 8 front lower arms, 14 rear trailing / toe control / lateral links, and a rear axle. Single item purchase is also possible. Rubber hardness 109-140% (compared to mass production)
Rubber bush upper and lower. Front and rear. Rubber hardness (compared to mass production): 127%.
Refer to image of No.1, 7, 2, 8.
AUTO EXE UPPER MOUNT SET FEATURES:
Mounted between the damper's top mounts to increase the damper's movement during small strokes and support the rise of damping force. If the bush in this portion is soft, the bush bends before the stroke of the damper due to the input from the road surface, which hinders the initial operation of the damper. It is recommended to replace mass-produced dampers and springs at the same time. Ideal as the first step in bush replacement. Rubber hardness 127% (compared to mass production).
A set of Upper arm(front)*, Upper lateral link(rear) and leading link(rear). *Remarks - Press-fitting work of bush is necessary for installation.
Rubber hardness (compared to mass production): 125-146%.
Refer to image of No.3, 11, 13.
AUTO EXE SUSPENSION BUSH SET - UPPER FEATURES:
Optional product assuming combination with suspension bush (lower). By mounting the set, total tuning that suppresses the deflection of the entire suspension is completed. It realizes solid handling without ambiguity even in sports running on a closed course where high loads are continuous. Although vibration absorption is ensured compared to metal pillow balls, it should be noted that the feeling of pushing up on rough roads etc. increases in exchange for direct feeling. Set of a total of eight places: upper and lower arms on the front and rear, and lateral / leading links. Single item purchase is also possible. Rubber hardness 125-146% (compared to mass production).
Battery stay. Made of one-piece steel, designed with the image of an Auto Exe strut tower bar. Vivid red color. With stainless logo plate.
Choose the type please.
MND1700: For Roadster ND
A1700: Mazda2/Demio DJ, Axela BM, Mazda6/Atenza GJ, CX-3 DK without i-ELOOP, CX-5 KF/KE, CX-8 KG
0 Item
Please reload your browser if the view type does not change.
