Model : KE KF
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -65 to -27 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○ It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. The data is for CX-5, KEEFW, PE-VPS engine, MY 02/2012 - 02/2017 For KEEFW, PE-VPS, MY 02/2012 - 02/2017 KEEAW, PE-VPS, MY 02/2012 - 02/2017 KE2FW, SH-VPTS, MY 02/2012 - 02/2017 KE2AW, SH-VPTS, MY 02/2012 - 02/2017 KE5FW, PY-VPS, MY 10/2013 - 02/2017 KE5AW, PY-VPS, MY 10/2013 - 02/2017 KF2P, SH-VPTS, MY 02/2017 - 03/2018 KF2P, SH-VPTS, MY 02/2017 - 03/2018 KF5P, PY-VPS, MY 02/2017 - 03/2018 KF5P, PY-VPS, MY 02/2017 - 03/2018 KF2P, SH-VPTS, MY 03/2018 - KF2P, SH-VPTS, MY 03/2018 - KF5P, PY-VPS, MY 03/2018 - KF5P, PY-VPS, MY 03/2018 - Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KEEFW, PE-VPS, MY 02/2012 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -65 to -27 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KEEFW, PE-VPS engine, MY 02/2012 - 02/2017 Remarks: 2WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KEEAW, PE-VPS, MY 02/2012 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -75 to -37 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KEEAW, PE-VPS engine, MY 02/2012 - 02/2017 Remarks: 4WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE2FW, SH-VPTS, MY 02/2012 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -90 to 0 / -65 to -27 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KE2FW, SH-VPTS engine, MY 02/2012 - 02/2017 Remarks: 2WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE2AW, SH-VPTS, MY 02/2012 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -90 to 0 / -75 to -37 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KE2AW, SH-VPTS engine, MY 02/2012 - 02/2017 Remarks: 4WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE5FW, PY-VPS, MY 10/2013 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -90 to 0 / -65 to -27 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KE5FW, PY-VPS engine, MY 10/2013 - 02/2017 Remarks: 2WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE5AW, PY-VPS, MY 10/2013 - 02/2017
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -90 to 0 / -75 to -37 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: B *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CX-5, KE5AW, PY-VPS engine, MY 10/2013 - 02/2017 Remarks: 4WD, Rear damping dial is in wheel well BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE2AW, Grade- XD, XD L PACKAGE, 2200cc, 4WD, MY 02/2012 - 11/2016
Delivery time by Air : 10-15 days
Category : Coilovers
SPRINGS: included EDFC compatibility: available. If you would like to buy EDFC, leave the message in the comment field in the process of ordering. Pay us later by PayPal. Damping force adjustment: Front- available / Rear- available Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -40 / Rear: -35 Ride height adjustable range(mm): Front: MAX LOW - HI: -66 to -30, RECOMMENDED LOW - HI: -50 to -30 / Rear: MAX LOW - HI: -63 to -30, RECOMMENDED LOW - HI: -45 to -30 Spring: Front: RATE(N/mm / Kgf/mm): 58.8/6.0, FREE LENGTH(mm)/I.D.(mm): 250/ / Rear: RATE(N/mm / Kgf/mm): 44.1/4.5, FREE LENGTH(mm)/I.D.(mm): 263/ Check TEIN page for details For CX-5, KE2AW, Grade- XD, XD L PACKAGE, Engine- 2200cc, Drive train- 4WD, MY 02/2012 - 11/2016 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Damping force adjustable Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE2FW, Grade- XD, XD L PACKAGE, 2200cc, FF, MY 02/2012 - 11/2016
Delivery time by Air : 10-15 days
Category : Coilovers
SPRINGS: included EDFC compatibility: available. If you would like to buy EDFC, leave the message in the comment field in the process of ordering. Pay us later by PayPal. Damping force adjustment: Front- available / Rear- available Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -40 / Rear: -40 Ride height adjustable range(mm): Front: MAX LOW - HI: -65 to -30, RECOMMENDED LOW - HI: -50 to -30 / Rear: MAX LOW - HI: -62 to -30, RECOMMENDED LOW - HI: -50 to -30 Spring: Front: RATE(N/mm / Kgf/mm): 58.8/6.0, FREE LENGTH(mm)/I.D.(mm): 250/ / Rear: RATE(N/mm / Kgf/mm): 44.1/4.5, FREE LENGTH(mm)/I.D.(mm): 263/ Check TEIN page for details For CX-5, KE2FW, Grade- XD, XD L PACKAGE, Engine- 2200cc, Drive train- FF, MY 02/2012 - 11/2016 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Damping force adjustable Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : KE5AW, Grade- 25S, 25S L PACKAGE, 2500cc, 4WD, MY 02/2012 - 11/2016
Delivery time by Air : 10-15 days
Category : Coilovers
SPRINGS: included EDFC compatibility: available. If you would like to buy EDFC, leave the message in the comment field in the process of ordering. Pay us later by PayPal. Damping force adjustment: Front- available / Rear- available Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -35 / Rear: -35 Ride height adjustable range(mm): Front: MAX LOW - HI: -52 to -17, RECOMMENDED LOW - HI: -45 to -25 / Rear: MAX LOW - HI: -63 to -30, RECOMMENDED LOW - HI: -45 to -30 Spring: Front: RATE(N/mm / Kgf/mm): 58.8/6.0, FREE LENGTH(mm)/I.D.(mm): 250/ / Rear: RATE(N/mm / Kgf/mm): 44.1/4.5, FREE LENGTH(mm)/I.D.(mm): 263/ Check TEIN page for details For CX-5, KE5AW, Grade- 25S, 25S L PACKAGE, Engine- 2500cc, Drive train- 4WD, MY 02/2012 - 11/2016 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Damping force adjustable Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Who we are
How to order