Spec:
- Cold air type
- Core: H178xW171 xD76(mm), 9layers, Aluminum
- Air guide: Aluminum
Contents:
- Oil cooler core (with air guide and net)
- Stainless mesh hose (with #6 connector and heat-resistance tube)
- Inline filter
- Oil pump
- Harness & switch
- Attachment
Note:
-The "NISMO logo" included in the connector is for product identification, so it does not guarantee the quality in terms of appearance or process deterioration.
-The core is anodized to prevent corrosion. As a result, the core fin may appear to be dirty, but there is no problem with performance.
-During working of the pump, a loud noise is generated.
-The ground clearance of the mounting part drops about 100 mm.
-With the installation of the differential oil cooler kit, approximately 1.5 liters of differential oil is required. This product does not contain def oil.
-Do not use at temperatures below freezing because there is a possibility of abnormal rise of hydraulic pressure and melting of wiring fuse.
For Z34 PN.21600-RRZ46
NISMO Diff oil cooler kit FEATURS:
This is an item geared for those who enjoy continuous circuit driving in Fairlady Z (Z34) models.
In addition to using a core with superior heat exchanging capacity, air guides can now be set by using a layout optimized for each vehicle model, this kit both increases cooling through the introduction of air into the core and avoids heat damage from the muffler. In addition, a net is included to prevent damage to the core due to flying objects. Furthermore, a dedicated harness and switch allow for ON/OFF control of the oil pump in the cabin.
Spec:
Core size, Row: 200x220x48, 15
Core location: In front of radiator
Type: S type
HKS Oil Cooler Kit S Type is a sandwich type which has a built-in thermostat attachment.
Hose size: #10
With Aluminum Air Guide
Remarks: Single core kit
Check HKS page for details
Features:
Oil Cooler Kit for Vehicle Specification
Optimum size of the core and layout design improves cooling performance.
With the use of a new core, both cooling and pressure drop prevention are balanced at a high level. Some vehicle applications contain air guides which maximize the air flow through the oil cooler core during vehicle operation, even in drifting applications where the car may not be facing in the direction it is pointing.
* Some kits are the factory replacement type.
Core Size/ Row: W200xH130xD32 / 9-layer
Core Location: In front of radiator
Components: AT Fluid cooler core, AT Fluid cooler core bracket,
Hose φ10, Hose φ8, φ10-φ8 adapter pipe, Hose band #4, Corrugate tube
Check HKS page for details
For Z34 VQ37VHR engine, MY 2008/12-