High-flow surge tank + Twin Injector PRO kit.
Casting. HKS original shape.
Layout is designed to use stock holes of air temp sensor, niple, blow by pipe…
Content
HIGH FLOW SURGE TANK
-Surge tank assy
-Brackets set
TWIN INJECTOR PRO KIT
-Fuel delivery assy (Union AN6/M16)
-Injector holder x6
-Adapter assy
-Bolts, washers...
Size: Φ150-80 x 2/Red
Remarks: Replace stock air cleaner box. It can be used with Premium Suction Kit (70018-AN007).
For GT-R, R35, Engine VR38DETT, MY 12/2007 -
Check HKS page for details
Features:
-The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits.
-Stealth frame is redesigned!
Surface area increased by approximately 27%.
-Bold white HKS logo printed on black anodized back plate accentuates the engine bay!
Real sports
TECHNOLOGY
Vehicle specific suction pipe design. Angle and length of pipe enhance the induction efficiency. It is effective for quick response for NA engines and higher performance for turbocharged engines.
Point
With stock suction system, induction air hit to corrugated portion of hose and makes swirl and resistance. The specially designed pipe reduces corrugated portion and gap inside pipe to make air flow smoother.
-Frame Support
-Racing suction adopted wet two-layer type
-Super Inner Frame
-Super Lip Funnel
Core type: A3
For GT-R, MY 12/2007- , Model R35, Eng.VR38DETT
BLITZ CARBON INTAKE SYSTEM Features:
- Advanced forming technology, high-performance intake system with a carbon duct and the best fit case to the engine room.
- With carbon duct and case, light weight, high strength, and properly control the intake air temperature.
- Exclusive vehicle type duct and case efficiently capture the ram pressure and achieve a sharp intake response .
- The air cleaner body uses a stainless steel mesh filter and realized the suction efficiency and racing sound.
- Since the stainless steel filter can be re-use again and again if washed. Its ability is semi-permanent.
- Carbon item makes engine room look nicer.
Size: Φ150-80 x 2/Red
Remarks: Full suction kit for Racing Suction(70020-AN107) with Premium Suction(70018-AN007) Piping.
For GT-R, R35, Engine VR38DETT, MY 12/2007 -
Check HKS page for details
Features:
-The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits.
-Stealth frame is redesigned!
Surface area increased by approximately 27%.
-Bold white HKS logo printed on black anodized back plate accentuates the engine bay!
Real sports
TECHNOLOGY
Vehicle specific suction pipe design. Angle and length of pipe enhance the induction efficiency. It is effective for quick response for NA engines and higher performance for turbocharged engines.
Point
With stock suction system, induction air hit to corrugated portion of hose and makes swirl and resistance. The specially designed pipe reduces corrugated portion and gap inside pipe to make air flow smoother.
-Frame Support
-Racing suction adopted wet two-layer type
-Super Inner Frame
-Super Lip Funnel
Inner diameter of HKS' specially designed cast aluminum suction pipe is 53 compared with stock 45.
By large inner diameter of the pipe, restriction of intake air flow is reduced by about 12% that will solve bottle neck at high boost level.
It is designed to reuse stock blow-by pipes and the design prevents heat problem.
Although it is beautiful aluminum polished finish, unfortunately it is hard to be seen after installation.
However, the kit has proven performance.
You can see further info on HKS' homepage.
OK for 2011 model.