Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 10.0 / 6.0
Free length F/R: 180 / 180
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -55 to -10 / -55 to 0
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: x
Extension dial with the product: x
Stabilizer link with the product F/R: x / x
Please check the chart on BLITZ HP.
The data is for CIVIC, EK2,EK3,EK4, D13B,D15B,B16A engine, MY 09/1995 - 09/2000
For
EK2,EK3,EK4, D13B,D15B,B16A, MY 09/1995 - 09/2000
EK9, B16B, MY 08/1997 - 09/2000
Remarks: Removing or customizing is required because front stock tower bar interfere
Optional parts
DSC PLUS GPS sensor kit is listed as 135-055-999
DSC PLUS remote switch is listed as 135-055-998
BLITZ DAMPER ZZ-R SpecDSC PLUS Features:
G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle.
-Equipped with "Full Auto" mode.
-Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions.
-2.5-inch VA liquid crystal display.
-Damping force of four wheels can be displayed at any time.
-More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size.
-Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed.
-In addition to real-time display of G, peak display is also possible, which is convenient for setting.
-A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control.
-The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup.
-Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness.
-With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Model : EK9, Grade- TYPE R, 1600cc, FF, MY 08/1997 - 08/2000
Delivery time by Air : 10-15 days
Category : Coilovers
SPRINGS: included
EDFC compatibility: Extention Kit required. Motor install location is not confirmed. If you would like to buy, leave the message in the comment field in the process of ordering. Pay us later by PayPal.
Damping force adjustment: Front- available / Rear- available
Full-length ride-height adjustable: Front- N/A / Rear- N/A
Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.)
Base ride height drop(mm): Front: -20 / Rear: -25
Ride height adjustable range(mm): Front: MAX LOW - HI: -65 to +1, RECOMMENDED LOW - HI: -30 to -10 / Rear: MAX LOW - HI: -67 to -1, RECOMMENDED LOW - HI: -35 to -15
Spring: Front: RATE(N/mm / Kgf/mm): 58.8/6.0, FREE LENGTH(mm)/I.D.(mm): 225/Φ70 / Rear: RATE(N/mm / Kgf/mm): 29.4/3.0, FREE LENGTH(mm)/I.D.(mm): 225/Φ70
Check TEIN page for details
For CIVIC TYPE R, EK9, Grade- TYPE R, Engine- 1600cc, Drive train- FF, MY 08/1997 - 08/2000
Features:
Incredibly low price - Shock absorber for street use with an astonishing price tag.
Sealed Structure
Thread-Type ride height adjustment
Twin-tube system
Uses OE mounts
High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating"
Damping force adjustable
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Model : EK2,EK3,EK4, D13B,D15B,B16A, MY 09/1995 - 09/2000
Delivery time by Air : 14-21 days
Category : Coilovers
Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 10.0 / 6.0
Free length F/R: 180 / 180
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -55 to -10 / -55 to 0
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: x
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For CIVIC, EK2,EK3,EK4, D13B,D15B,B16A engine, MY 09/1995 - 09/2000
Remarks: Removing some interior parts is required for adjustment rear damping force
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, Click here to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 10.0 / 6.0
Free length F/R: 180 / 180
Spring F/R: ID62 straight spring / ID62 straight spring
Height adjustment range F/R: -55 to -10 / -55 to 0
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model.
Extension dial with the product: x
Stabilizer link with the product F/R: x / x
BRAIN connection: x
For CIVIC TYPE R, EK9, B16B engine, MY 08/1997 - 09/2000
Remarks: Removing some interior parts is required for adjustment rear damping force
BLITZ DAMPER ZZ-R features:
- Single cylinder type (monotube) structure. The entire length adjustable suspension kit.
- Reasonable price.
- 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing.
- Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight.
- φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models)
For more info, Click here to check BLITZ HP
Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.