Model : ANH10W,MNH10W, 2AZ-FE,1MZ-FE, MY 05/2002 - 05/2008
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Stock Rate F/R(kgf/mm): 6.0 / 7.0 Free length F/R: 220 / 220 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -100 to 0 / -70 to -28 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For ALPHARD, ANH10W,MNH10W, 2AZ-FE,1MZ-FE engine, MY 05/2002 - 05/2008 Remarks: 2WD BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ANH15W,MNH15W, 2AZ-FE,1MZ-FE, MY 05/2002 - 05/2008
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Stock Rate F/R(kgf/mm): 6.0 / 7.0 Free length F/R: 220 / 220 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -100 to 0 / -80 to -38 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For ALPHARD, ANH15W,MNH15W, 2AZ-FE,1MZ-FE engine, MY 05/2002 - 05/2008 Remarks: 4WD BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ATH10W, 2AZ-FXE, MY 07/2003 - 05/2008
Delivery time by Air : 14-21 days
Category : Coilovers
Spec: Mount F/R: Reinforced rubber / Stock Rate F/R(kgf/mm): 6.0 / 7.0 Free length F/R: 220 / 220 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to -10 / -65 to -20 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For ALPHARD HYBRID, ATH10W, 2AZ-FXE engine, MY 07/2003 - 05/2008 BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ANH15W, Grade- AS, AX, 2400cc, 4WD, MY 05/2002 - 05/2008
Delivery time by Air : 10-15 days
Category : Coilovers
Compatibility: Compatible model. SPRINGS: included EDFC compatibility: N/A. Damping force adjustment: Front-N/A / Rear- N/A Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -50 / Rear: -55 Ride height adjustable range(mm): Front: MAX LOW - HI: -80 to -25, RECOMMENDED LOW - HI: -60 to -40 / Rear: MAX LOW - HI: -83 to -41, RECOMMENDED LOW - HI: -65 to -45 Spring: Front: RATE(N/mm / Kgf/mm): 39.2/4.0, FREE LENGTH(mm)/I.D.(mm): 300/ / Rear: RATE(N/mm / Kgf/mm): 64.7/6.6, FREE LENGTH(mm)/I.D.(mm): 248/ [ NOTE ] RR: OE DUST BOOT NEEDS TO BE MODIFIED. Check TEIN page for details For ALPHARD, ANH15W, Grade- AS, AX, Engine- 2400cc, Drive train- 4WD, MY 05/2002 - 05/2008 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ANH10W, Grade- AS, AX, 2400cc, FF, MY 05/2002 - 05/2008
Delivery time by Air : 10-15 days
Category : Coilovers
Compatibility: Compatible model. SPRINGS: included EDFC compatibility: N/A. Damping force adjustment: Front-N/A / Rear- N/A Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -60 / Rear: -60 Ride height adjustable range(mm): Front: MAX LOW - HI: -85 to -30, RECOMMENDED LOW - HI: -70 to -50 / Rear: MAX LOW - HI: -81 to -39, RECOMMENDED LOW - HI: -70 to -50 Spring: Front: RATE(N/mm / Kgf/mm): 39.2/4.0, FREE LENGTH(mm)/I.D.(mm): 300/ / Rear: RATE(N/mm / Kgf/mm): 64.7/6.6, FREE LENGTH(mm)/I.D.(mm): 248/ [ NOTE ] RR: OE DUST BOOT NEEDS TO BE MODIFIED. Check TEIN page for details For ALPHARD, ANH10W, Grade- AS, AX, Engine- 2400cc, Drive train- FF, MY 05/2002 - 05/2008 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : MNH10W, Grade- MZ, MS, MX, 3000cc, FF, MY 05/2002 - 05/2008
Delivery time by Air : 10-15 days
Category : Coilovers
Compatibility: Compatible model. SPRINGS: included EDFC compatibility: N/A. Damping force adjustment: Front-N/A / Rear- N/A Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -60 / Rear: -45 Ride height adjustable range(mm): Front: MAX LOW - HI: -85 to -30, RECOMMENDED LOW - HI: -70 to -50 / Rear: MAX LOW - HI: -66 to -24, RECOMMENDED LOW - HI: -55 to -35 Spring: Front: RATE(N/mm / Kgf/mm): 39.2/4.0, FREE LENGTH(mm)/I.D.(mm): 300/ / Rear: RATE(N/mm / Kgf/mm): 64.7/6.6, FREE LENGTH(mm)/I.D.(mm): 248/ [ NOTE ] RR: OE DUST BOOT NEEDS TO BE MODIFIED. Check TEIN page for details For ALPHARD, MNH10W, Grade- MZ, MS, MX, Engine- 3000cc, Drive train- FF, MY 05/2002 - 05/2008 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : MNH15W, Grade- MZ, MS, MX, 3000cc, 4WD, MY 05/2002 - 05/2008
Delivery time by Air : 10-15 days
Category : Coilovers
Compatibility: Compatible model. SPRINGS: included EDFC compatibility: N/A. Damping force adjustment: Front-N/A / Rear- N/A Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -45 / Rear: -50 Ride height adjustable range(mm): Front: MAX LOW - HI: -75 to -20, RECOMMENDED LOW - HI: -55 to -35 / Rear: MAX LOW - HI: -78 to -36, RECOMMENDED LOW - HI: -60 to -40 Spring: Front: RATE(N/mm / Kgf/mm): 39.2/4.0, FREE LENGTH(mm)/I.D.(mm): 300/ / Rear: RATE(N/mm / Kgf/mm): 64.7/6.6, FREE LENGTH(mm)/I.D.(mm): 248/ [ NOTE ] RR: OE DUST BOOT NEEDS TO BE MODIFIED. Check TEIN page for details For ALPHARD, MNH15W, Grade- MZ, MS, MX, Engine- 3000cc, Drive train- 4WD, MY 05/2002 - 05/2008 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Model : ATH10W, Grade- BASE MODEL, G-EDITION, 2400cc, 4WD, MY 07/2003 - 05/2008
Delivery time by Air : 10-15 days
Category : Coilovers
Compatibility: Compatible model. SPRINGS: included EDFC compatibility: N/A. Damping force adjustment: Front-N/A / Rear- N/A Full-length ride-height adjustable: Front- N/A / Rear- N/A Upper mount: Front- UPPER MOUNTS not included.(Please use OE.) / Rear- UPPER MOUNTS not included.(Please use OE.) Base ride height drop(mm): Front: -55 / Rear: -55 Ride height adjustable range(mm): Front: MAX LOW - HI: -90 to -35, RECOMMENDED LOW - HI: -65 to -45 / Rear: MAX LOW - HI: -86 to -44, RECOMMENDED LOW - HI: -65 to -45 Spring: Front: RATE(N/mm / Kgf/mm): 39.2/4.0, FREE LENGTH(mm)/I.D.(mm): 300/ / Rear: RATE(N/mm / Kgf/mm): 64.7/6.6, FREE LENGTH(mm)/I.D.(mm): 248/ [ NOTE ] RR: OE DUST BOOT NEEDS TO BE MODIFIED. Check TEIN page for details For ALPHARD HYBRID, ATH10W, Grade- BASE MODEL, G-EDITION, Engine- 2400cc, Drive train- 4WD, MY 07/2003 - 05/2008 Features: Incredibly low price - Shock absorber for street use with an astonishing price tag. Sealed Structure Thread-Type ride height adjustment Twin-tube system Uses OE mounts High durable & reliability- TEIN-Green Powder Coating, Special Surface Treatment "ZT Coating" Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.
Please input your Email address and password.
Who we are
How to order