Model : NGX50 and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
C-HR 4WD / 12.2016-05.2018 / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50
C-HR 2WD / 12.2016-05.2018 / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40
C-HR 4WD / 05.2018- / NGX50 / 8NR-FTS / -2° 30' - -1° 30'* / -120 - -50
C-HR 2WD / 05.2018- / NGX10 / 8NR-FTS / -2° 30' - -1° 30'* / -105 - -35
C-HR 2WD / 05.2018- / ZYX10 / 2ZR-FXE / -2° 30' - -1° 30'* / -110 - -40
CAMRY 2WD / 07.2017- / AXVH70 / A25A-FXS / -2° 30' - -1° 30'* / -84 - -22
COROLLA SPORT 2WD / 06.2018- / NRE210H / 8NR-FTS / -2° 30' - -1° 30'* / -77 - -15
COROLLA SPORT 4WD / 06.2018- / NRE214H / 8NR-FTS / -2° 30' - -1° 30'* / -106 - -41
COROLLA SPORT 2WD / 06.2018- / ZWE211H / 2ZR-FXE / -2° 30' - -1° 30'* / -77 - -15
COROLLA TOURING 2WD / 10.2019- / NRE210W / 8NR-FTS
COROLLA TOURING 2WD / 10.2019- / ZRE212W / 2ZR-FAE
COROLLA TOURING 2WD / 10.2019- / ZWE211W / 2ZR-FXE
PRIUS 2WD / 12.2015-12.2018 / ZVW50 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35
PRIUS 2WD / 12.2015-12.2018 / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35
PRIUS 4WD, E-Four / 12.2015-12.2018 / ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35
PRIUS 2WD / 12.2018- / ZVW51 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35
PRIUS 4WD, E-Four / 12.2018-/ ZVW55 / 2ZR-FXE / -2° 30' - -1° 30'* / -82 - -35
PRIUS PHV / 02.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35
PRIUS PHV GR SPORT / 09.2017- / ZVW52 / 2ZR-FXE / -3° 00' - -2° 00'* / -82 - -35
* The camber adjustable range is the measured value when the camber is adjusted only with this product.
* The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed.
* MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.
Model : ZVW50,51 and various models. See the description.
Delivery time by Air : 10-15 days
Category : Control arms & Endlinks
For
Prius ZVW50 ZVW51 ZVW55
Prius PHV ZVW52
COROLLA SPORT AXAH52/54 MXAA52/54
C-HR ZYX10 NGX50
CUSCO ADJUSTABLE REAR UPPER ARM Features:
- Adjust to the suitable camber angle to improve wearing down of tire inward or unstable behavior
- Improve traction and braking performance by improving rear tire ground contact
* Adjustment: Turnbuckle type that can be adjusted while installed, as it is
* Setting: Rear
* Able to adjust camber and toe direction in combination with Adjustable rear toe control rod
Model : NGX50 and various models. See the description
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
C-HR 4WD / 12.2016-05.2018 / NGX50 / 8NR-FTS / -5° 00' - +1° 00'* / -90 - -30
C-HR 2WD / 12.2016-05.2018 / ZYX10 / 2ZR-FXE / -5° 00' - +1° 00'* / -80 - -20
C-HR 4WD / 05.2018- / NGX50 / 8NR-FTS / -5° 00' - +1° 00'* / -90 - -30
C-HR 2WD / 05.2018- / NGX10 / 8NR-FTS / -5° 00' - +1° 00'* / -65 - 0
C-HR 2WD / 05.2018- / ZYX10 / 2ZR-FXE / -5° 00' - +1° 00'* / -80 - -20
Remarks - Use genuine stabilizer link for installation
BLITZ MIRACLE CAMBER ADJUSTER Features:
- The camber angle of the suspension can be freely and easily changed, DAMPER ZZ-R series dedicated option bracket.
-And for a front corresponding to the strut type suspension, set by vehicle type and for rear mounting on the lower arm mounting portion.
- By moving the hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, simple and can be adjusted camber wide range stepless.
- Freely by the camber angle can be adjusted, optimized ground conditions of the tire during low down width of alignment is widened, improving driving performance, suppression of uneven wear, also adjustment at wide wheel mounting easy.
- Stay to secure the brake hose and ABS line is also standard equipment. Possible bolt mounted so Some models are also optimized mounting position of the stabilizer link.