Diameter: M12xP1.25
A set of 2pc
Lod length / Adjustable range / Part number / Remarks
1.L=155mm / 225mm-255mm / 00B 318 A22 / Front
2.L=195mm / 265mm-295mm / 00B 318 A26 / Front
3.L=235mm / 305mm-335mm / 00B 318 A30 / Front
4.L=275mm / 345mm-375mm / 00B 318 A34 / Front
!! the max of 4. is 375mm. Compatible link length is up to +15mm compared with OEM.Please be careful in the case of a vehicle that has drastically lowered down.
Remarks: Adjustable range and OEM length is from the center of ball joint bolt to the center.
Note:
Regarding reference compatibility, it is based on OEM sway bar link length.
There is possiblity of exceeding the adjustment range and interference, etc. due to mounted parts (height controlled device, stabilizer, etc.).
After installing and adjustment this product, be sure to check that there is no interference of each part.
FEATURES OF CUSCO ADJUSTABLE SWAY BAR LINK:
This part can adjust correct mounting angle of stabilizer when lowering height.
High quality adjustable stabilizer link to exert original performance and effect.
-Possible to adjust angle in a millimeter.
-Bolt on type. Just replace OEM sway bar link.
For BLITZ DAMPER ZZ-R series.
Spec:
(VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range)
TOYOTA 86 / 04.2012- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 unconfirmed 86 with OEM 16inch wheel
86 GR / 12.2017- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30
86 GR SPORT / 07.2018- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30
Camber adjustable.
When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required.
Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice.
The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment.
BLITZ MIRACLE STROKE ADJUSTER Features:
- Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster.
- The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected.
- To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height.
- The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle.
- Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.