Model : ZC6, 6MT ealier and later model, 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
TUNERS KIT without Catalyzer B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: X ECU: X Boost Controller: X B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For BRZ, ZC6, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Model : ZC6, 6MT ealier and later model, 6AT ealier model
Delivery time by Air : 14-21 days
Category : Turbo kit & Supercharger,Engine components
Exclusive oil pan. Welded oil pan for installation of BLITZ TURBO SYSTEM 86 / BRZ. Installation gets easier and working time can be shortened.
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 45-60 days
Category : Turbo kit & Supercharger
Size: 60φ CONCEPT and FEATURES: HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter. Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit. Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased. Note: It is necessary to lift the engine for pipe replacement. Kit includes: joint pipe, gasket, bolts and nuts required for installation.
Please input your Email address and password.
Model : ZC6, 6MT ealier and later model, 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
FULL KIT B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: with down pipe ECU: ○ Boost Controller: ○ SBC TypeS B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For BRZ, ZC, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Model : ZC6, 6MT ealier and later model, 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
STARTUP KIT B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: with down pipe ECU: ○ Boost Controller: X B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For BRZ, ZC, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Model : ZC6, 6MT ealier and later model, 6AT ealier model
Delivery time by Air : 28-35 days
Category : Turbo kit & Supercharger
TUNERS KIT B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: ○ with down pipe ECU: X Boost Controller: X B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For BRZ, ZC, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 10-15 days
Category : Turbo kit & Supercharger
A set of Tubine in gasket 10200-05, Turbine out gasket 10200-06, Exhaust manifold gasket 10200-07 x2, Oil out pipe gasket 10200-15, Bolts and nuts set 10200-16, down pipe gasket 10200-17 and washer 10200-18 x2. Blitz used to sell those parts separately but they now only sell this full kit.
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 10-15 days
Category : Turbo kit & Supercharger
Contents: GTIII-RS Turbocharger Assy with an actuator. Oil & Water Piping Parts Air Cleaner, Suction Pipe Front-mounted Intercooler, Piping Exhaust Manifold, For 11001-KT001, CATless Extension Insulator Cover, Insulator Sheet Gaskets, Brackets, Bolts, etc. For BRZ, ZC6, FA20 engine, 03/2012 - 07/2016 CATless Extension. Click here to check the performance data in HKS page Note: This kit can be used with HKS S-TYPE OIL COOLER KIT. * OIL COOLER KIT is NOT included in this kit. * This is an image of a prototype and may differ from the actual product. * Reinforced fuel parts such as injectors are required. * Pressure sensor is required separately. * Vehicle modification is required in order to install this kit * Engine management parts are not included in this kit. * Resetting is required. * Reinforced clutch is required to avoid slippage of the clutch disk that may occur due to significant torque characteristic change. * It is strongly recommended to install an oil cooler to protect the engine. Features: HKS has released a long-waited Bolt-on Turbo Kit with GTIII-RS turbine for 86/BRZ. GTIII-RS turbine that is the best match with 2L engine, special designed turbo housing, and other special parts are made by HKS special turbo technology. This kit is available from a stock to tuned engine. The engine output will reach 450ps when this kit is installed to a tuned engine. * Another kit including the extension with CAT is additionally available.
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 25-35 days
Category : Turbo kit & Supercharger
S/C SIZE: GTS7040L Remarks: It needs setting for each vehicle using ECU.For Fuel upgrade kit (14007-AT001) setting. For BRZ, ZC6, Engine FA20, MY03/2012- Click here to check HKS page Features: - HKS GT Supercharger Pro Kit has all the parts you need for installation except computer-control device. (Maintenance parts like, oil, plug and etc. are not included) - It needs a separate engine control device and need to set the fuel and ignition timing. We have special fueling parts and controlling device for the P ro Kit which let you set up easily. Pro kit includes GT S/C unit, Super Power Flow, Intercooler, Suction pipe, S/C bracket, Chamber pipe, Pulley/belt, Relief valve, Traction oil cooler, Traction oil tank, Traction oil. Please choose the applied model (F is MY2017/10 and after).
Please input your Email address and password.
Model : ZC6
Delivery time by Air : 60-75 days
Category : Turbo kit & Supercharger
Include T518Z-10cm2 actuator type (original boost 4kpa 0.5kg/cm2), SUS EX manifold, SUS front pipe, intercooler, Aluminum piping and AIRINX
Please input your Email address and password.
Who we are
How to order