JDM specialist Japanparts.com

Main pipe diameter: 70. Not compatible with GReddy Power Extreme R (10113301) or Power Extreme 3 (10114300).

Main pipe diameter: 70. Not compatible with GReddy Power Extreme R (10113301) or Power Extreme 3 (10114300) or Power Extreme Light-S (10113250).

Plug shape: ISO type. Thermal values, heat range - select #6, #7 or #8. The price is for a set of 2, with resistor. * Cannot be used on direct fuel injection engines, including QR20DD, QR25DD, VQ25DD, VQ30DD, VK45DD. Spec: -Electrode material・・・・・iridium -Electrode diameter ・・・・φ0.6 -Two spark plugs per set Features: The use of iridium alloy dramatically increases ignition performance, creating much more complete combustion and increasing both increased power and response. It helps to draw out the full potential of the engine. The thermo edge set at the top of the insulator controls the deposition of carbon, which otherwise can reduce firing performance and cause poor idling. This also increases reliability and durability. Selection of heat values: Plugs with high heat ranges do not indicate higher speeds. Depending on the type of racing, the use of a too-high heat range may result in the plug not firing correctly, resulting in reduced RPM; use of too low a heat range can result in burning, causing poor high-rotational pickup. Be sure to select the plug that meets the type of racing and the engine. For: K11 CG10DE,CG13DE,CGA3DE N14 GA13DS,GA15DS,GA16DE, SR18DE,SR20DET N15 GA15DE,GA16DE,SR16VE,SR18D P10 SR18Di,SR18DE,SR20DE P11 SR18DE,QG18DE,SR20DE,SR20VE (R)S13,S14,S15 SR20DE(T) R32 RB26DETT R33 RB25DE(T),RB26DETT R34 RB25DE(T),RB26DETT Z32 VG30DE(TT) Parts Number: 22401-RN010-6 22401-RN010-7 22401-RN010-8

Components: Front Monoblock Caliper (4pot) Rear Monoblock Caliper (2pot) Front Brake Rotor (345mm) Rear Brake Rotor (330mm) Caliper mounting bracket (Front / Rear) Rubber made brake hose(Front / Rear) Brake Pad (Front / Rear) * Upgrading of the standard master cylinder is not necessary. * Due to the change in brake size, normal wheels cannot be used. TRD 18 inch alloy wheels (SF2, TF2) must be installed. * The Rubber made brake hose(Front / Rear) is the exclusive parts for this kit. Toyota OEM brake hose or aftermarket brake hose cannot be used.

Glossy. Twill Type. Use double side tape to install.

Applied model D and after advanced package models and so on use.

Pair.

Standard type. Reinforcement of rubber hardness.

For EJ series engine. Reinforced rubber. Price is for a set of RH & LH.

Standard type. Reinforcement of rubber hardness.