Parts arrived safely and well packaged, Pending installation until all suspension parts are ready.
- Photo
- Installation tips
Installation seems straightforward just requires time and work:
- remove bolts and clips from under cover w/ 12mm socket wrench.
- Remove Cross member support plate flange bolts (2 bolts)
- If equipped with support arm front, remove (4 flange bolts).
- If no front support arms, remove 4 flange bolts on cross member support plate.
- w/ front support arm: use new long flange bolts to loosely secure the front support arms and flexible lower arm bar with pillow ball bolt facing outwards and cross member support plate.
- Tighten center bolt that secures the front support arm.
- Without front support arms; use flange bolts short to secure flexible lower arm bar with cross member support plate (tighten to 60Nm (6.0Kg f-m) using 14mm socket wrench and torque wrench)
- Tighten the self-locking nut that temporarily fastens the pillow ball bolt and bracket on the left side of the bar. (Tightening torque: 35N m (35Kg f+m)
- The bar should rotate smoothly.
Written by Edward (UNITED STATES) | 2025-09-11
Calculate Shipping fee Shipping fees are shown automatically after Sign in.
To Your Door by AIR/SAL Only available shipping method(s) is/are shown below.
To Your Door by SEA Only available shipping method(s) is/are shown below.
To Airport by Air Cargo The shipping fee is shown only when you have selected the airport.
To Seaport by Sea Cargo The shipping fee is shown only when you have selected the sea port.
Items you recently viewed
Hello,Customer.
off: Office close *: Manufacture close
Payment methods
Spend less time at the register.
Be one of the first to pay with PayPal in stores.
It's the most flexible way to pay at your favorite
stores.