Part of the rear wiper assembly being used on a B4 BL Legacy S402 conversion project. This part serves as a weather barrier on the interior part of the glass.
- Photo
- Installation tips
Installation, replacement takes some effort but is straightforward.
- Remove Rear wiper arm by taking off hinge cover then remove nut that secures wiper arm to shaft axle and lift arm off.
-
- Access rear wiper motor from rear trunk, unplug electrical wire from wiper arm motor
- Locate washer fluid hose and detach from inlet of wiper motor then temporarily crimp hose.
- Remove plastic outer cap to reveal second nut and remove nut then remove washer fluid nozzle.
- Remove bolts that secures the wiper motor assembly with bracket from rear trunk.
- You now have access to install or replace the internal rear wiper cushion then re-install following steps above but in reverse.
Written by Edward (UNITED STATES) | 2025-12-26
Calculate Shipping fee Shipping fees are shown automatically after Sign in.
To Your Door by AIR/SAL Only available shipping method(s) is/are shown below.
To Your Door by SEA Only available shipping method(s) is/are shown below.
To Airport by Air Cargo The shipping fee is shown only when you have selected the airport.
To Seaport by Sea Cargo The shipping fee is shown only when you have selected the sea port.