MICRO SEIKI RX-1500 2-ARM TURNTABLE SYSTEM
**SOLD in 2002 to a Hong Kong buyer through Ebay; page is for reference only**
This system is USED, COMPLETE, LESS Cartridges, there are NO Cartridges offered with this System; otherwise it's Complete. Operates at 100V 50/60Hz, there is NO voltage adapter included and this will require a stepdown transformer for use in most countries capable of 10 W output or more.
Consists of;
Motor Unit: RY-1500
MICRO Air Pump Unit RP-1090
Platter Unit with Base: RB-1500
Belt
MICRO Accessory Strobe Plate
MICRO Accessory Set of Plinth Base Isolator Feet R-15 (Set of 4)
TONEARM: SME 3010R , Complete with adjusting tools, setting templates, has an
AUDIO TECHNICA Headshell.
TONEARM: AudioCraft AC-4000MC , Unipivot design with 2 x spare Tonearms, spare
counterweights, setting templates.
MICRO Tonearm bases for each tonearm (2 bases as pictured)
This Unit is One Owner, is approximately 15 years Old, it appears to have been very
well handled and cared for and is representative of one of MICRO SEIKIS finest
products; I would conservatively rate the overall condition at a strong 8.5/10
(with 10 being New in the Box). There are some very small marks from typical
use, overall this is in Excellent cosmetic and operating condition. The Owner has
kept all documentation with this System, including Warranty cards and the Tonearms come complete
with all documentation, Packaging, tools and templates for setup, which will be
included with the Item.
There is no Original packaging for the Turntable, however
This system uses a Vacuum Disc Stabilizer system for clamping
the Record to the Platter.
CLICK ON THE THUMBNAILS FOR BIGGER PICTURES!!
 Strobe
Disc 50/60Hz |
 T/T
with Arms |
 Detail
of the Base |
 AudioCraft
Arm and Base |
 T/T
with Arms |
 Motor |
 Motor
detail, Pitch control |
 Motor
detail |
 System
from above |
 Plastic
platter protector |
More detail:
 RP-1090
Vacuum Motor |
 Vacuum
Motor |
 Vacuum
Motor Back |
 Isolation
Base Set |
 isolation
Base Set |
 Isolation
Base install diagram |
 SME
3010R Box |
 AudioCraft
and SME Cables |
 SME
Templates and paperwork |
 AudioCraftTemplates,
etc. |
 AudioCraft,
2 Spare Arms/Counterweights |
 AudioCraft
packaging |
Questions?: to: gware@eudoramail.com
